User manual MOTOROLA T815

[. . . ] Phone-Based Navigation System T815 featuring MOTONAVTM User's Manual CONTENTS 1 ­ INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MOTONAV FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] See section 7 ­ GPS Receiver Operating Basics. Installing MOTONAV from the Storage Card You can easily install MOTONAV from the storage card included in your MOTONAV package by following the steps provided below: 1. With your phone on, insert the SD card into the SD slot on your Smartphone. Note: You may need to turn the device on and off, depending on the device type. When prompted to choose an installation location, select Device and press Install. A message should appear saying, "MOTONAV. CAB was successfully installed on your device. " Press Done. The home screen will open with the MOTONAV shortcut. Note: If you are using a Motorola Q, and you don't see the MOTONAV shortcut, press Start > Settings > Home screen > Home screen Layout, and select Windows Default. Start MOTONAV by selecting the home screen shortcut or press Start > MOTONAV. Avoid running several other applications while running MOTONAV. Note: The memory card must be kept in your mobile phone in order to enable map usage. Note: The MOTONAV software can only be installed once. If the initial installation was not successful, please call Motorola Customer Care at the appropriate number listed in section 16 ­ Motorola Customer Care. Connecting Via Bluetooth MOTONAV will automatically connect to your GPS receiver via Bluetooth. Please follow the instructions below to ensure your successful connection. Do not attempt to pair and connect using the Windows utilities or Bluetooth Manager. Turn your phone's Bluetooth feature on. Your phone's Bluetooth feature is "off" by default. Note: If you are using a Motorola Q, scroll to Start > Bluetooth > Bluetooth Manager > Settings > Status. If you are using another phone, please refer to your user manual. Place the GPS receiver in close proximity to your mobile phone. The blue Bluetooth status light will flash on the GPS receiver. Note: If the light is solid blue before you turn on your phone, the GPS Receiver has already connected to another device nearby. When the other nearby device is turned off, the Bluetooth status light should start flashing again. [. . . ] Usually only the front window is metalized, so putting the GPS receiver in the rear window may improve GPS signal strength. Putting the receiver near the metal roof (via the visor clip) may also have the same effect. Sometimes manufacturers will leave an unmetalized spot on the windshield for radio reception purposes. GPS signals are the strongest when the receiver has a clear view of the sky above. [. . . ]