User manual MOTOROLA TALKABOUT T62

[. . . ] Before using this product, read the RF Energy Exposure and Product Safety Guide that ships with the radio which contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation. package Contents Package Content Radio Belt clip Battery Power Supply Stickersheet(16pcs) Owner’s manual T62 2 2 2 1 1 1 Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16 need to be activated by user before they can be selected. Channels 9 to 16 should only be used in countries where these frequencies are allowed by government authorities. [. . . ] Channels 9 to 16 should only be used in countries where these frequencies are allowed by government authorities. Channels 9 to 16 are not allowed in Russia. Easy Pairing The Easy Pairing feature allows a group of radio users to program all their radios to the same Channel and Sub-Code settings quickly and simultaneously. Any one radio within the group can be designated as the “Leader’s radio” and have it’s Channel and Sub-Code settings transmitted to and copied by all the other radios in the group (Members’ radios). Pick any one of the radios as the “Leader’s radio”. On this radio, program the Channel and Sub-Code to the desired settings. (See “Selecting the Channel” and “Selecting the Sub-Code” sections in this user manual) 2. To copy the channel and Sub-Code combination to all the other “Members’ radios”, press and hold the button on the Members’ radios until you hear a beep. Release the button after the beep, and wait for the transmission from the Leader’s radio. Selecting the Sub-Code Sub-Codes help minimize interference by blocking transmissions from unknown sources. Press Menu until the code starts to flash. You can hold down the button to speed up scrolling through the codes. Menu to continue 6 Note: • You will see the icon blinking on the display. This confirms that the radio is in Easy Pairing mode waiting to receive the Channel and Sub-Code settings from the Leader’s radio. All Members’ radios will remain in this mode for 3 minutes. € A group with many radios should have all users take this step at the same time, so all radios can be programmed in one go. Note: When using iVOX/VOX, there will be a short delay. On the Leader’s radio, press and hold down the until you hear a double beep. Button Dual Channel Monitor Enables you to scan the current channel and another channel alternately. Press or to select the channel then press Menu. Press the PTT button or wait until time out to activate Dual Channel Monitor. The screen will alternate between home channel and Dual Channel Monitor channel. [. . . ] Et langt tryk på disse taster giver dig mulighed for hurtigt at rulle igennem kanalerne for at gennemse koderne. Tryk på knappen PTT for at forlade menuen eller på Menu for at forsætte opsætningen. Tryk på knappen PTT for at forlade menuen eller på Menu for at fortsætte opsætningen. Tryk på knappen PTT for at forlade menuen eller på Menu for at fortsætte opsætningen. [. . . ]