User manual MOTOROLA TLKR T40

[. . . ] Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet to ensure compliance with RF energy exposure limits. 09375 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 PMR Channels 121 Sub-Codes (38 CTCSS Codes & 83 DCS codes) Up to 10 km Range* Internal VOX Circuitry LED Torch 10 Selectable Call Tone Alerts Backlit LCD Display Roger Beep Up Timer Room Monitor Battery Charger Battery Level Meter Channel Monitor Channel Scan Dual Watch Keypad Lock Auto Power Off Auto Squelch Control Auto Repeat (Scrolling) Battery Save Battery Low Alert Battery Low Sleep Tone (On/Off) Direct Call (Caller ID Call) Group Call Silent Mode All Call Auto Channel Change IP Rating : IPX2 (for T80), IPX4 (for T80 Extreme) Power Source: NiMH battery Pack / 4 AAA Alkaline batteries Battery Life: 16 Hours (under typical use conditions) *Range may vary depending on environmental and/or topographical conditions. 1 English Control and Functions Antenna Headset jack (Headset not included) Volume Knob with Power SW Up/Down Menu Navigation Button Top Lanyard Bar LED Torch Button (Call) Button MON (Monitor) Button GRP/MENU(Menu/ Group) Button SEL/ (Select/Lock) Button Microphone PTT (Push-To-Talk) Button Speaker DC IN 9V Jack Bottom Lanyard Bar Note : Radio depicted is T80 Extreme. [. . . ] The user can set an ID name of up to four (4) characters. If the ID is already taken, USED is seen. If USED is not shown, then the ID is available. Set ID Name The ID Name appears on the other radio’s display when you make an All Call or a Direct Call. The ID Name will also on the other radio’s display when they are placing a Direct Call. When no ID name is set, the unit number appears. Or to select a character that will blink on the display. SEL/ to select and move to the next character. SEL/ Note: The radio cancels selected ID Number and entered ID Name, then exits from Group Menu when MENU/GRP button is pressed. Dual Watch Mode Enables your to scan the current channel and another channel alternately. Or to select the channel, then press SEL/ . Or to select the Sub-code, then press SEL/ . Note: If you set the same channel and Sub-code as the current channel, Dual Watch doesn’t work. Room Monitor Enables your radio to detect voice/noises (according to the sensitivity level set) and transmit back to the listening radio without pushing the PTT button. The monitoring radio is not able to receive any transmissions in this mode. Or to the desired room monitor sensitivity level. Note: Use level 1 in quiet environments. Note: When the voice/noise in the monitored room continues for more than 60 seconds, the monitoring radio stop monitoring for 5 seconds, and resumes. The display shows TX icon and CALL icon while transmitting. Features on Your Radio Channel Scan Mode Enables your radio to scan for active channels. When activity is detected, your radio lands (stays) on that channel for 2 seconds (5 seconds for VOX ON without headset). To transmit on that channel, press the PTT button. [. . . ] Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive royalty free license to use that arises by operation of law in the sale of a product. What Is Not Covered By The Warranty • Defects or damage resulting from use of the Product in other than its normal and customary manner or by not following the instructions in this user manual. defects or damage from misuse , accident or neglect. Defects of damage from improper testing, operation, maintenance, adjustment, or any alteration or modification of any kind. [. . . ]