User manual MOTOROLA WPS870G

[. . . ] WPS870G Regulatory, Warranty, and Copyright Information User Guide WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO ENSURE REGULATORY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. [. . . ] You may be prompted for your Windows CD-ROM. If required, you can also install TCP/IP. However, depending on your LAN environment, TCP/IP may require further configuration. ­ 2 If neither protocol is present: ­ ­ 3 If either protocol is already installed, proceed with installation. PAGE 52 User Guide WPS870G Windows IP Printing You can set up your computer(s) to print from your applications using an IP address instead of the WPS870G's Printer Utility. To accomplish this, you need to add and configure a printer port on your computer with the appropriate information. With this printing method, print jobs are stored (queued) on your computer, and then sent to the WPS870G when it is available. What Is Required To enable this feature you need the following: An installed and connected WPS870G. An active printer attached to the WPS870G. The IP address of the WPS870G ­ it is suggested that you use a Static IP address for this feature, because an IP address supplied by a DHCP server might change. For older versions of Windows, the IPP Client software must be installed on each computer. The IPP_Client. exe software is located on the CD-ROM supplied with the WPS870G. Windows 2000 and XP require no additional software. PAGE 53 WPS870G Windows 98SE/ME IP Printer Port Setup This section installs the IPP client and configures your port for IP printing. 1 2 User Guide Insert the CD-ROM supplied with your WPS870G. Navigate to the IPP folder and double-click the IPP_Client. exe file to install the program. Once finished, navigate to the program by clicking Start > Programs > IPP Port Monitor > Add IPP Port. The Configure IPP Port window is displayed: 3 In the IP address field, type the IP address or URL of the WPS870G. The Port Name field automatically displays the name used. If using a Proxy Server, enter the necessary information (this will be the same as your browser configuration). Click Select Device Port to view the available ports on the WPS870G, and select the appropriate port. Click Save. 4 5 PAGE 54 User Guide The AddPort window is displayed: WPS870G 6 If desired, you can click Add New Printer to add a new printer for the IP port. Highlight the printer you want to use for the IP port and click OK. The ADDPORT window is displayed: 7 Click OK. Your printing port is now configured for IP Printing. To print from any application, select the printer configured for the port. [. . . ] TCP/IP The Transmission Control Protocol/Internet Protocol suite provides standards and rules for data communication between networks on the Internet. It is the worldwide Internetworking standard and the basic communications protocol of the Internet. Tunnel To place packets inside other packets to send over a network. The protocol of the enclosing packet is understood by each endpoint, or tunnel interface, where the packet enters and exits the network. [. . . ]