User manual MOULINEX DD310110

[. . . ] € This device should not be used by children. Keep the appliance and its cord out of reach of children. € The blades are extremely sharp: handle them with care so as not to do yourself any harm when you are emptying the bowl, when assembling /dismantling the blades on the bowl and during cleaning. € Remember: you may injure yourself if you use the appliance incorrectly. [. . . ] € We recommend you to wash the blender immediately after use. € Attention: Do not to use the mayonnaise blender for purposes other than preparation of sauces, especially, it is not suitable for the mixing of soup. uSING COMPATIBLE ACCESSORIES • Mixer foot: Fig. 4 et 5 • Place the ingredients in a container that is tall enough to avoid splashing. € Do not fill the jug (D) to more than 500 ml (18 fl oz) to avoid splashing. € Do not operate the mixing foot (E) at turbo speed for more than 30 seconds at TURBO speed. - Screw the blender foot (E) onto the motor unit (A), and ensure that the foot is screwed on completely before plugging in the appliance. - Insert the blender foot (E) halfway down into the container Fig. 5 and press the speed start button (B1 or B2). IMPORTANT: Do not operate the appliance when empty. - Before mixing hot preparations, remove the container from the heat source. For best results, there is no need to move the mixer foot around in the preparation. Instead insert the foot in the centre of the container with the blender head submerged halfway down in the food. - For stringy ingredients (leeks , celery , etc. ), clean the foot regularly during the preparation, ensuring that you follow the safety instructions for dismantling and cleaning the appliance. - When making fruit-based preparations, slice the fruit and remove the cores and any stones beforehand. - Do not operate the appliance to prepare hard ingredients (sugar, chocolate, coffee, ice-cubes). F & 6 - Fit the blades (F2) onto the drive pin of the bowl (F1). - Place the ingredients in the bowl (F1) then fit the inner cover (F3) then the lid (F4). - Fit the motor unit (A) onto the lid (F4). - Plug in the motor unit (A) and press the speed start button (B1 or B2) and process food. - Remove the motor unit (A) then the lid (F4) then the inner cover (F3). [. . . ] Your appliance is equipped with a device to protect against overheating. If your appliance overheats, it will switch itself off. In this case, leave it to cool down for about 20 minutes then start using it again. HELPLINE: If you have any product problems or queries, please contact our Customer Relations Team first for expert help and advice: See contact list attached. [. . . ]