User manual MOULINEX HM 4121

[. . . ] € Children must be supervised to ensure that they do not play with the appliance. € Always unplug the appliance when you are finished using it, when assembling and disassembling accessories and during cleaning. € Do not use the appliance if it is not working correctly, if it is damaged or if the power cord or plug is damaged. To avoid all danger, these must be replaced by an authorised service centre (see list in the service booklet). [. . . ] Always begin mixing or kneading at setting 1 initially, then move to setting 2, 3, 4 or 5. - To knead thick consistent doughs we recommend using setting 5 only. - You can also increase the speed by pressing the turbo button (A3): this function can be used at all speeds. We recommend that it is only used briefly (a maximum of 30 seconds for thick consistent doughs). € Then press the ejection button (A1) to remove the beaters or mixers. € Using with the base (H): (According to model) • Check that the speed control (A2) is set to “0”. € Insert the rod of each beater (C) or mixer (E) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape, the mixer or beater with the left beater marker (G) should be positioned to the left, in the biggest hole (Fig. € Place the base (H) on the worktop: - To raise the arm, unlock by pressing on the button (J) (Fig. - Press on button (J) to unlock the arm and lower it (Fig. ) - Place the mixer, fitted with kneaders or beaters, on the hinged arm until your hear it click into place (Fig. € Connect the appliance: - Your appliance has five speed levels and a turbo button. Always begin mixing or kneading at setting 1 initially, then move to setting 2, 3, 4 or 5. 6) 11 SM_MIXER_PREPLINE_EO_2550865-02_2550865-02 09/12/10 16:22 Page12 - You can also increase the speed by pressing the turbo button (A3): this function can be used at all speeds. We recommend that it is only used briefly (a maximum of 30 seconds for thick consistent doughs). • After finishing , set the speed control (A2) to “0”. € Disconnect and press the unlock button (J) to raise the hinged arm. Then press the mixer unlock button (K) to remove the mixer from its stand. € Then press the ejection button (A1) to remove the beaters or kneaders. eN Blender function (according to model) • Check that the speed control (A2) is set to “0”. € Remove the panel at the back of the appliance and screw the Blender rod (N) anti-clockwise onto the Motor Unit (A), without forcing it, until the red dots are aligned. You will hear a small click when the red dots match up indicating that the rod is correctly positioned (fig. [. . . ] € Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller personer som mangler den nødvendige erfaring eller kunnskap, med mindre disse personene er under den nødvendige overvåking eller får de nødvendige instruksjoner når det gjelder bruk av apparatet av en annen person som er ansvarlig for deres sikkerhet. Mikser Eject-tast for visper og eltekroker Hastighetsvelger Turbo-tast Flerbladet visp for lette masser Flerbladet visp for lette masser (modell med blandebolle) Eltekroker for tyngre masser Eltekroker for tyngre masser (modell med blandebolle) Båndvisp (avhengig av modell) Sikkerhetstapp H. Sokkel (avhengig av modell) Blandebolle (avhengig av modell) Knapp for å låse / låse opp vippearmen (avhengig av modell) Knapp for å låse / låse opp mikseren (avhengig av modell) Tannhjul (avhengig av modell) Spatel (avhengig av modell) Blander (avhengig av modell) Doseringsbolle (avhengig av modell) Igangsetting • Ta tilbehøret ut av emballasjen, og rengjør det i varmt vann. Trykk deretter på knappen for frigjøring av mikseren (K) for å fjerne mikseren fra sokkelen. [. . . ]