User manual MOULINEX IM 3060

[. . . ] The soleplate may be very hot: never touch it and always let it cool down before putting it away. Your appliance gives off steam, which may cause burns, especially when you are ironing on a corner of your ironing board. Never direct the steam towards people or animals. Your iron should be used and placed on a flat, stable, heat-resistant surface. [. . . ] When you put your iron onto its iron rest, make sure that the surface on which you put it is stable. Your appliance has been designed to operate using untreated tap water. However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits from the steam chamber. Heat concentrates the elements contained in water during evaporation. The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining, or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your iron. If the soleplate temperature is too low, the iron will not produce steam because of the anti-drip technology which prevents droplets of water leaking from the soleplate. This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer refuses any responsibility and the guarantee will not apply. Begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher temperature. You are not using the right type of water. perform a self-cleaning operation and consult the section "What water to use?" Fabric fibres have accumulated in the holes of the soleplate and are burning. Perform the self-cleaning operation and clean the soleplate with a damp sponge. Vacuum the holes of the soleplate from time to time. Always spray starch onto the reverse side of the fabric to be ironed. Clean the anti-scale valve and carry out a selfclean. Refer to the chapter “Clean the soleplate”. The soleplate is dirty or brown and can stain the linen. [. . . ] Refer to the chapter “Clean the soleplate”. The soleplate is dirty or brown and can stain the linen. You are ironing with an inappropriate setting (temperature too high). Your linen has not been rinsed sufficiently or you are using starch. [. . . ]