User manual MOULINEX LM 3001 FACICLIC & LM 3001,MV

[. . . ] The power cord must be kept out of the reach of children and must not be placed near or come into contact with the hot parts of the appliance, sources of heat or sharp corners. € For your safety, only use accessories and spare parts that correspond to your appliance, sold by an approved service centre. 13 • The blades are very sharp: handle them with caution to avoid injury. € Never use the blender or its accessories without ingredients and never pour boiling liquids into the jug. [. . . ] USING YOUR APPLIANCE • Moisten the gasket (c2) and position it correctly on the blade unit (c1): the 3 folds of the gasket must be visible once it is in place. If it is positioned in the other direction, you will not be able to lock the blade unit on the jug. € Place the assembly (c1+c2) on the base of the jug (c3). Lock it by rotating the blade unit through a quarter turn in the anticlockwise direction. € Introduce the ingredients into the assembled jug without exceeding 14 the maximum level indicated: * 1. 25L for thick mixtures * 1L for liquid preparations. Place the measuring cup (c5) in its recess on the lid. € Place the blender jug assembly (C) on the motor unit (A). The red lock (open is aligned in the slot on the motor unit. 3 - position 1) • Then rotate the blender jug (C) through a quarter turn until the green lock (closed) appears. 2 jug positions are possible: handle on the right or left of the motor unit. € Remove the jug and rinse it and its lid under running water. € To clean the motor unit (A), use a moist cloth. € Never immerse the motor unit (A) in running water. € For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use. € The jug (C) and accessories (D, E) can be cleaned in the dishwasher in the top basket with the “ECO” or “LIGHTLY SOILED” programme. € To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. Remove the gasket (c2) and clean them under running water or in the dishwasher. 16 WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?Problems Causes The plug is not fitted correctly into the socket . The jug or accessory is not correctly positioned or locked on the motor unit. Solutions Plug the appliance into a socket and switch on. [. . . ] € End of life electrical and electronic products: Your appliance is expected to last for many years. However, when the time comes to replace it, do not throw it into the bin, but take it to the recycling centre in your town (or to a waste reception centre where applicable). Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point. [. . . ]