User manual MOULINEX LM 233A

[. . . ] Children should not be left to play with the appliance. Children should not attempt to clean or service the appliance unless they are aged at least 8 years or older and supervised. 7 • Please keep the appliance and its power cord out of the reach of children less than 8 years of age. € Check that your power supply voltage corresponds to that shown on the appliance (alternating current only). [. . . ] To maintain safety, these parts must be replaced by an Approved Service Centre. € Any intervention other than normal cleaning and maintenance by the customer must be performed by an Approved Service Centre. € For you own safety, only use accessories and spare parts from the appliance manufacturer, which are especially designed for your appliance. Safety locking The appliance will not operate if the blender jug assembly (D) or the accessories (E) or (F) are not correctly positioned and locked on the motor unit (A). Before first use Before using your appliance for the first time, clean all the accessories (D, E, F) in warm water and washing up liquid, except for the motor unit (A). CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning the appliance and when emptying the bowls or jug. Make sure all the packaging has been removed before operating the appliance. Important note: Turn the speed selector (B) to “0” before placing the blender assembly or accessories on the motor unit. Do not turn the blender on if the lid (D6) is not properly in place on the blender jug (D4). Use Using the blender • Before assembling the jug (D) choose the most convenient position for the jug handle (D4) (on the right or on the left. With the "clic" button (D2) of the blades block (D1) in front of you, place the locating rib (D3) in the assembly slot located at the base of the jug (D4) (fig. 1 a) then lower the blade unit (D1) down into the second slot (D4) (fig. 1b) located at the front of the jug base until the unit is locked in place (you will hear a click) (fig. Make sure that the jug (D4) and the blade unit (D1) are well assembled, press the button (D2) and place the ingredients in the jug without exceeding the maximum level indicated on it: * 1. 25 L for liquid mixtures Make sure that the joint (D5) is on the lid (D6) (fig. 2 a) and place the two together on the jug (D4). Put the cap (D7) in the slot destined for it on the lid top. Place the assembled blender jug (D) on the motor unit (A), with the "clic" button (D2) on the blade unit aligned with the "clic" button (C) on the motor unit (Fig. 2b) and press the jug down firmly to lock it on the motor unit (you will hear a double click) (Fig 3). Plug in the appliance and turn the speed selector (B) to the desired position or press "Pulse" a few times. 9 To stop the appliance, turn the speed selector (B) to the "0" position. Remove the jug (D) from the motor unit (A) by pressing the "clic" button (C) then lift off the jug (fig. [. . . ] The joint (D5) is not well Place the joint (D5) correctly on the placed on the lid. Leak at the The blade unit (D1) not Place the blade unit correctly on the bottom of the properly or securely locked on jug; you must hear a click. The button (D2) must be fully aligned with the blade unit (D1). 11 Problems Causes Solutions The blade Pieces of food too large or too Reduce the size or quantity of does not turn hard. [. . . ]