User manual MOULINEX MO1823

[. . . ] REPAIRS Repairs must be carried out by specialists with original spare parts. Improperly carried out repairs can cause serious danger to users. MT0005 01) b - Textile bag* * According to model: this is either equipment specific to certain models or available as an optional accessory 902739_mini-space_902739 01/02/11 14:28 Page12 17. Flexible tube with grip and mechanical power regulator 18. [. . . ] - For furniture : use the brush of the convertible crevice tool * (23) or the upholstery nozzle * (22). Always switch off and disconnect your vacuum cleaner before changing accessories. * According to model: this is either equipment specific to certain models or available as an optional accessory 902739_mini-space_902739 01/02/11 14:28 Page13 CONNECTING THE CABLE AND STARTING YOUR APPLIANCE EN • Unravel the cable completely, connect your appliance, - fig. €¢ Adjust the power of the vacuum : with the mechanical power adjustment : open the slider control to manually reduce the suction power, except on fragile surfaces - fig. STORING AND TRANSPORTING THE APPLIANCE • After use, stop the vacuum cleaner by pressing on the On/off pedal (2) and disconnect it. Store the cable by pressing on the pedal of the cable winder. €¢ In the vertical position, place the all floor nozzle (21) in its storage position under the appliance (1b) fig. €¢ In the horizontal position, place the all floor nozzle (21) in its storage position behind the appliance. €¢ You can transport the appliance easily, thanks to its carrying handle (6). CLEANING AND MAINTENANCE Important : Always switch off and disconnect your vacuum cleaner before maintenance or cleaning. CHANGING THE BAG • The “bag full” indicator (4) tells you that the bag needs to be emptied or is saturated. €¢ Place the pins in the notches- fig. €¢ Adjust the micro filter* behind the motor protection grill (11) -fig. €¢ Make sure the micro filter* is properly positioned (12) before closing the cover. RS-RT9926) Clean the (H)EPA* filter cassette every 6 months (according to frequency of use). * According to model: this is either equipment specific to certain models or available as an optional accessory 902739_mini-space_902739 01/02/11 14:28 Page14 • Open the lid (8) of your vacuum cleaner fig. €¢ Tap the (H)EPA* filter cassette (13) on the top of a bin - fig. €¢ Then pass it through clear water, fig 34 and let it dry for at least 24 hours- fig 35. €¢ Ensure that the (H)EPA* filter cassette (13) is fully dry before re-inserting it in the machine. €¢ Place the pins in the notches- fig. €¢ Adjust the (H)EPA* filter cassette (13) in its compartment - fig. €¢ Make sure the (H)EPA* filter cassette (13) is properly positioned before closing the lid. [. . . ] IF THE SUCTION NOZZLE IS DIFFICULT TO MOVE • Open the regulator to turn down the power. IF THE CABLE DOES NOT COMPLETELY RETRACT • The cable is held back by something outside its entry point : straighten out the cable and press on the cable return pedal. * According to model: this is either equipment specific to certain models or available as an optional accessory 902739_mini-space_902739 01/02/11 14:28 Page15 If the problem persists, take your vacuum cleaner to the nearest Moulinex Approved Service Centre. consult the list of Moulinex Approved Service Centres , or contact Moulinex’s Consumer Services. [. . . ]