User manual MOULINEX MO3723PA COMPACT POWER CYCLONIC

[. . . ] Children must not play with the appliance. Cleaning and maintenance of this appliance must not be carried out by children unless they are at least 8 years old and supervised by a responsible person. Keep the appliance and its cord away from children under 8 years old. €¢ Do not use the appliance if the power cord is damaged. [. . . ] 6) or, for best results, use the parquet nozzle* (24). - For corners and hard to reach spots: use the crevice/brush nozzle (26) in the flat position. - For upholstery and delicate surfaces: use the brush side of the crevice/brush nozzle (26) or the upholstery nozzle* (25). EN Pluging in the power cord and starting the appliance • Unwind the power cord completely, plug in your vacuum cleaner (fig. €¢ Set the suction power using the manual power control located on the grip: increase the control opening in order to manually diminish the vacuuming power, for example on fragile surfaces… – fig. Storing and transporting the appliance • • • • After use, switch off your vacuum cleaner by pressing the ON/OFF pedal (2) –fig. Rewind the power cord by pressing the power cord rewind pedal (3) - fig. In the vertical position, place the nozzle (23) in its compartment under the appliance (1b) – fig. In the horizontal position, place the nozzle (23) in its compartment at the back of the appliance (1b) – fig. €¢ Transport your vacuum cleaner easily thanks to its transport handle (6). CLEANING AND MAINTENANCE Important: Always switch off and unplug your vacuum cleaner before maintenance or cleaning. €¢ Turn the compartment over and place the accessory (18b) into the lock slot of the air/dust separator base (17) - fig 26. €¢ Open, making sure to turn in the proper sense for unlocking ( ) – Fig. €¢ Unclip then remove the air/dust separator (15) by turning it in the unlocking direction ( ) – Fig. €¢ Then rinse the dust tray (13), the air/dust separator base (16) and the air/dust separator (15) with soapy water – Fig. €¢ Once dry, replace then clip the air/dust separator (15) on the air/dust separator base (16), following the right sense for locking ( ) – Fig. €¢ Place them back on the dust tray (13) - fig 33. €¢ Place the accessory (18b) into the lock slot of the air/dust separator base (16) - fig 34. €¢ Close, making sure to turn in the proper sense for locking ( ) – Fig. €¢ Clip the HEPA filter case (14) (black foam filter (14a) + HEPA filter (14b)) onto the tray – Fig. €¢ Replace the tray (13) in its compartment (7) – Fig. CLEANING THE HEPA FILTER (14b) The air we breathe contains particles that can be allergenic: larva and dust mite faeces, mould, pollen, smoke, and animal waste (hair, skin, saliva, urine). [. . . ] 903398-01_MO25_city-space-cyclonic_903398/01 11/07/13 09:51 Page11 • Assemble the HEPA filter case (14): black foam filter (14a) and HEPA filter (14b) under the dust tray (13) – Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 01 Important: Change the microfilter* every 6 months. 01 is available at your local retail store or at one of our Authorized Service Centres. [. . . ]