User manual MOULINEX QA 404H

[. . . ] Children must be supervised to ensure that they do not play with the appliance. € Check that the power rating of your appliance corresponds to your electrical supply. Any connection fault invalidates the warranty. € Your appliance is intended only for domestic culinary use, in an indoor setting and under supervision. [. . . ] € Using the button (a2), release the multi-function head (a3) and raise it to the upper position. € Release the accessory (c1), (c2) or (c3) from the multi-function head by pushing the accessory into the head and rotating it clockwise a quarter turn. • Remove the stainless steel bowl. 2 - BLENDING/MIXING (DEPENDING ON MODEL) Depending on the nature of the food, you can use the blender (d) to prepare up to 1. 1 - ASSEMBLING THE ACCESSORIES • Place the multi-function head (a3) in the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position). € Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-clockwise and then remove it. Indd 16 22/2/13 1:34 PM EN • Make sure that the appliance is switched off before locking the blender (d). € Lock the blender jug (d) on the outlet (a4) by rotating it clockwise. € Place the food in the blender jug, and lock the lid (d2) fitted with the measuring cap (d3), by rotating it anticlockwise. 2 - USAGE • Start by turning the selector button (a1) to the desired position according to the recipe. Use the “Pulse” position for better mixing control and for a better blending of your preparation. 3 - FITTING THE MINCER HEAD ON THE APPLIANCE • Facing the attachment outlet (e), insert the assembled mincer head (f) inclined to the right, aligning the two bayonets in the mincer head with the two notches in the attachment. Push the mincer head home into the attachment and turn the mincer head anti-clockwise until it latches with the feed tube in the vertical position. € Place the removable tray (f8) on the feed tube. 4 - USAGE, TIPS AND DISMANTLING • Make sure that the safety cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4). € Place a container to collect the preparation in front of the appliance. € Run the appliance by turning the selector (a1) to speed “3” or “4”. € Push the meat, piece by piece, down the feed tube, using the pusher (f7). Never push the ingredients down the feed tube with your fingers or any other utensil. € To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop. Indd 17 22/2/13 1:34 PM EN • Unlock the mincer head in the reverse order of the assembly. Tips : - Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it into pieces of approximately 2 x 2 cm). [. . . ] - that the safety cover (a5) is present and locked when the high-speed outlet (a4) is not used. - that the multi-function head (a3) is locked horizontally. Your appliance comes with a microprocessor that controls and analyses the operating power. If the load becomes too high, your appliance will stop automatically. [. . . ]