User manual MPMAN FRA 400

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Use replacement parts as specified by the manufacturer. [. . . ] If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operation instruction. 18. ) Object and Liquid Entry Never push object of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 19. ) Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Note: This unit will become warm when used for a long period of time. This is normal and does not indicate a problem with the unit. 5 Controls and Indicators Sleep Indicator Weekend Indicator 1 2 Alarm 1 Indicator Alarm 2 Indicator 3 4 Snooze/Weekend Button Power/Alarm Reset Button Display Button 6 7 8 9 10 11 12 Maintenance Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation or dusty areas, places subject or constant vibration and/or humid or moist areas. Do not attempt to clean this unit with chemical solvents as this might damage the finish. Before turning on the power, make certain that the connecting cords and power cord are properly installed. When moving the set, be sure to first disconnect the power cord and remove cords connected to other equipment. 3 13 Clock Adjust Button Sleep Button Time Set Up Button Time Set Down Button Alarm 1 Button Alarm 2 Button Tuning Control 14 Radio Band Button Volume Control 15 16 4 LED Display Setting Clock Time 1. Press & hold the ALARM 1 button more than 2 seconds, the `HOUR`& `ALARM 1` LED indicators will flash and then press the Time Set `UP` or Time Set `DOWN` Button for hour adjustment. Press the ALARM 1 button to confirm the Hour set. Then, the `MINUTE` & `ALARM 1` LED indicators will flash and then press the Time Set `UP` or Time Set `DOWN` button for minute adjustment. Press the ALARM 1 button again to confirm the `ALARM 1` setting. Press & hold the ALARM 2 button more than 2 seconds, the `HOUR` & `ALARM 2` LED indicators will flash and then press the Time Set `UP`or Time Set `DOWN` button for hour adjustment. Press the ALARM 2 button to confirm the Hour set. Then, the `MINUTE` & `ALARM2` LED indicators will flash and then press the Time Set `UP` or Time Set `DOWN` button for minute adjustment. Press the ALARM 2 button again to confirm the `ALARM 2` setting. Sleeping to Radio This unit features a radio sleep timer which can be programmed to play the radio for a set amount of time(maximum 90 minutes) before automatically turning off. During `RADIO` playing, press the SLEEP button to switch on the sleep timer. The `SLEEP` LED indicator will light on. Press & hold the SLEEP Button more than 2 seconds to select the desire sleep time cyclically from 90, 80, 70 . . . . . [. . . ] Press the `ALARM 1` button once, the `ALARM 1` of RED LED indicator will light on, and the sound of `ALARM 1` in `BUZZER`. Press the `ALARM 1` button again, the `ALARM 1` of YELLOW LED indicator will Light on, and the sound of `ALARM 1` in `RADIO`. To cancel the `ALARM 1` , press the `ALARM 1` button again, the `ALARM 1` LED indicator will light off . Repeat the above steps 1 to 3 to set the sound of the `ALARM 2`. 90 3. 80 70 60 50 40 30 20 10 UP to 1 MIN. To cancel the SLEEP function, press the SLEEP button again, the 'SLEEP' LED indicator will light off. 7 8 Operating the Alarms Stopping & Resetting the ALARM Press the POWER/ALARM RESET button once to stop the sound of the `ALARM 1` or `ALARM 2` and it will automatic activate after 24 hours. BROWN-LIVE IMPORTANT The wires in the mains lead are coloured in accordance with the following code:-BLUE NEUTRAL Snooze operation The SNOOZE function will temporarily switch off the alarm for approximately 9 minutes, this is repeatable for a duration in one hour of alarm cycle. FUSE BLUE (NEUTRAL) N OUTER SLEEVE CORD GRIP BROWN (LIVE) L If your product is fitted with a moulded plug which requires replacement please cut off the plug and dispose of safety. [. . . ]