User manual MPMAN PC25HD

[. . . ] PC25HD Preface Thanks for your selection of this digital video camera. The user's manual shall be carefully read and put in a safe place before application for further reference. The contents covered by this manual refer to the latest information when this manual is compiled. The screen display, illustration and other instructions in this manual are used to more specifically and directly describe the operation of this video camera. [. . . ] During the play process, the play can be paused by pressing the up key and press the up key again to continue the play. HDMI output When the image and sound in the camera have to be output to the HDMI TV, please insert the output port of the HDMI wire into the HDMI interface on the camera and connect the HDMI input port to the video input port of the video equipment Note: please stop the recording/sound recording or play before connecting the HDMI or withdrawing the HDMI wire. TV output When images and sound in video camera needs to be outputted to TV, insert the public terminal of TV cable into TV interface in the video camera. Yellow port connects with video input port of video equipment and the red/white port connects with audio input port of video equipment. Note: before TV is connected or TV cable is pulled out, the video/sound recording or play shall be stopped. Close Under start-up state, press the power key for a long time, then the video camera will be closed. If the video camera stays in unused state and no operation is carried out beyond the set automatic close time (one minute/three minutes/five minutes), the video camera will be automatically closed to save power. Menu setting Under picture taking/recording and playback mode, press the menu key to open the menu and then press the up/down/left/right key to select menu. When selecting menu, the background of the selected menu option will be displayed with high brightness. 10 Recording/picture taking menu Date and time setting Press the menu key to open the menu and then press the left and right key to enter setting menu. Press the down key to select "date and time" menu option and press OK key to enter setting window. In setting window, press the left and right key to select the item to be adjusted (date and time), then the background of the selected item will be displayed in blue. Then press the up key or down key make adjustment. After adjustment is completed, press the confirmation key for confirmation or press the menu key to cancel the setting and exit. Finally press the menu key to exit the setting mode. Connect to the computer Before the computer is connected, the driver of the video camera shall be installed with installation CD. Firstly, connect the power supply of the video camera and then use USB connective cable in the fittings to connect with the usable USB port of the computer. USB mode is movable hard disk or PC camera. The video camera will automatically enter movable disk mode and it is possible to enter PC camera by pressing the playback key. 11 Progressive operation Picture taking/recording mode The camera will automatically enter picture taking/recording mode after it is started. Press the shutter key to directly take photos. Press the recording key to start shoot and press the recording key again to stop shooting. Press T key or W key to achieve digital zoom. Press the left key to open or close LED fill light (the fill light can not be used under playback mode). When the video camera is in idle state, press the down key to shift among the three screen display states, namely, close icon, close screen and normal display. [. . . ] When USB is connected, the memory card can not be pulled out to prevent data lost. Application of PC camera function Before the application of PC camera function, make sure to confirm that the camera driver has been installed to the computer. After driver is installed, the "start all programs" menu will be increased with one "SPCA 1528 PC Driver" menu which has the shortcut icon . After the video camera has been connected with the computer and has entered PC camera mode, click this shortcut icon (shown as the following picture) to open AMCAP window. All the relevant images corresponding to the camera lens of video camera will be displayed in AMCAP window. [. . . ]