User manual MPMAN PC39HD

[. . . ] This camcorder has an internal memory of 32MB, it can only record a few pictures or movie clips. If you want record more you have to use a SD or MMC card Page 7 of 41 SD/MMC card that this camcorder could support is up to 16GB ). Turn off the camcorder before inserting or removing the memory card. Be sure to orient the card correctly when inserting it. [. . . ] Using the menu in record mode When a menu is displayed, the joystick is used to make the desired setting. The audio record mode doesn't have a menu. Select a lower image quality to decrease the image size in order to capture more images. there are three options for choice:[Super] /[Fine] /[Normal]. White Balance Color Effect Adjust the white balance to suit different light sources. [Monochrome]: The pictures only have two colors: white and black. Exposure Set the exposure value manually to compensate for unusual lighting conditions such as indirect indoor lighting, dark backgrounds, and strong backlighting. Date Stamp This function can be used to add a date to your pictures as you take them. Self Timer Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Burst Snapshot Use this function to take 3 pictures continuously. [Single]: Press the shutter button once to take one picture. [Burst]: Press the shutter button once to take three pictures continuously. Menu item Resolution Frame Rate White Balance Audio Function Select small movie size to record longer time. there are two items for option:[1280x720]/ [720x480]. Select low frame rate to record longer time. [Enable]: Voice is recorded when recording movie clip. [Disable]: No voice is recorded when recording movie clips. Menu item Language Function Select a language for the Display menu and other information from the following languages: English, French, German, Italian, Spanish, Portuguese. Auto off To save power, the camcorder is turned off automatically after a period of time. You can review images on a television with the supplied AV cable. TV Out should be set to either NTSC or PAL depending on your region. Light Frequency should be set to either 60Hz or 50Hz depending on your region. [. . . ] Exe" (where D is your CD-ROM drive letter) in the text box, and click [OK]. (1 )Insert the CD to your PC; (2) Click "Install Driver" to install the driver; (2)Click "Next" and then click "Install" to install the driver; The installation is finished and now you can use the PC-Camera function. How to use the PC Camera function Power ON; connect the camcorder with the PC by USB-cable. Double click the icon Then you can start to use the PC-Camera function. [. . . ]