User manual MPMAN TPM 500

[. . . ] TPM500 DIGITAL VOICE RECORDER OPERATION MANUAL Note: If the unit is left unused for a long period, please turn off the POWER switch. Do not use the unit in places that are extremely hot, cold, dusty, or humid. Avoid the unit being dropped The battery service life may differ under different usage conditions and different models Please charge the unit when any of the following cases occur: * The logo appears and displays: low battery * The keys become inactive * The unit stops running under normal condition. * Do not allow water or foreign objects to enter the unit. [. . . ] For instance, while recording via HP, the file recorded will list at the end of the files recorded via HP; while recording via LP, the file recorded will list at the end of the files recorded via LP. The unit can support 199 files at most, if exceed 199, please create a new folder, move the files recorded previously to the newly-created folder, then continue recording. 3. 1 MP3 mode Under stop or pause status, press button to play current file NOTE: The unit can play the files in MP3 (The 3rd layer of MPEG1, MPEG2, MPEG3, MPEG2. 5) and WMA format. 3. 2 Pause/stop/power off Pause: under playback status, shortly press button to enter pause mode. The turn plate indicator will flash on the LCD. And press button again to continue the playback Stop: under playback or pause status, continuously press button for about 2seconds, the turn plate indicator stop flashing. Then release the button to return to the stop status. Under stop status, the total length of file will displayed below the track number 12 Power off: under playing or pause or stop status, continuously press button until the LCD display OFF. Then release the button the unit is power off Note: under pause or stop status, the unit will automatically power off if no operation was conducted within 3 minutes. 3. 3 previous / next file, FF/RW Under playback status, shortly press - button to skip to the previous file; shortly press + button to skip to the next file. Under the state of playback, press "-" to skip to the previous file; press "+" to skip to the next file; press and hold "+" to FF, press and hold "-" to RW. 3. 4-volume adjustment Press and hold "Mode", a shine line will appear below the turntable of LCD. Press and hold "+" to increase the volume, while continuously press "­"to decrease the volume. And the volume indicator on the LCD will change accordingly. 3. 5-EQ Mode selection Shortly press EQ button to select EQ modes 1-7, which correspond to NATURAL, ROCK, POP, CLASSIC, SOFT, JAZZ, and DBB effect. 3. 6-REPEAT modes selection Shortly press REP button to select repeat mode: no repeat, single repeat, and repeat all. 13 When you select single repeat or repeat all, the LCD displays . Delete one Under stop status, continuously press EQ button to enter delete mode. Then the LCD will display DELETE and ONE and the indicator will flash to be confirmed. Press the button again to delete current file. If you press other buttons except PLAY and EQ or no operation was conducted within 5 seconds, the unit will give up delete and return to stop status. Delete all Under stop status, continuously press EQ to enter delete mode. Then the LCD display DELETE and ONE and the indicator will flash to be confirmed, shortly press EQ button again, LCD will display and flash ALL to wait the confirmation. [. . . ] Then click "OK" button in the pop-out window and start formatting MP3 flash. 24 E. After formatting, click "OK" button in the right picture. 6) Uninstall the driving program A. According to the following picture, click Start>Program>SigmaTel MSCN Audio Player>Uninstall, or Control Panel>Explorer 25 Immediately the following window will pop out. Click "Cancel" if you want to cancel the operation, otherwise the following: Conversation window will appear. Click "OK" to start cancel the driving program, with the following conversation window appears then. 26 Note: This driving program may prevent driving program installation of other MP3 products. Download driving program manually under device manager or refer to the technical support of our company. [. . . ]