User manual MR COFFEE FTX23

[. . . ] Allow the appliance to cool before installing or removing parts and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return this appliance only to the nearest Authorized Service Center for examination, repair or adjustment. The use of accessory attachments not recommended for MR. [. . . ] Wash the bean hopper and grinding chamber parts with warm soapy water. (Never use abrasive cleansers, steel wool pads or other abrasive materials. Never immerse the Burr Mill itself in water, in any other liquid or place in the dishwasher. Install the Bean Hopper onto the unit and turn clockwise (several rotations-will hear clicking as unit gets tighter) until it stops with the grind size indicator on Fine (Figure 1). Please chamber lid back on grinder chamber and then install into unit, tightly locking into place. NOTE: If all Bean Hopper and Grinding Chamber parts are not tightly in place correctly, the safety switches within the machine will not allow the grinder to work. You MUST have all parts in place to safely use the Burr Mill. Set the Timer to 3 cups, this will keep the unit ON enough time to grind the finer grounds required. Set the Timer to 5 cups, this will keep the unit ON enough time to grind the finer grounds required. ⷠSingimpropermediumorcoarsecoffeegrindingsettingsmightaffectthetasteofthe U brewed espresso coffee, because the optimum coffee extraction is not achieved. If you like a strong cup of espresso, make sure the grind setting is fine. You MUST have all parts in place to safely use the Burr Mill. You may customize the above bean quantity recommendations as you familiarize yourself with your new MR. cOFFEE® Burr Mill , but always bear in mind the following: 1. Using finer grounds than required for brewing coffee in an automatic drip coffee maker might cause an overflow of the paper filter and/or the brew basket. Also, the taste of the coffee might be stronger than desired. If this happens, use less coffee grounds or change the grind setting to medium or to whichever setting is necessary to obtain the desired result. Using coarser grounds than required for brewing coffee in an automatic drip coffee maker might cause an overflow of the paper filter and/or the brew basket. Also, the taste of the coffee might be weaker than desired. If this happens, use more coffee grounds to obtain the desired result. For a regular or stronger cup of coffee, adjust the grind setting to a medium to fine setting. When a finer setting is required to brew espresso or cappuccino, please grind the amount of coffee grounds recommended by your product manufacturer. [. . . ] In the unlikely event that your new Burr Mill does not operate satisfactorily, please review the following potential problems and try the steps recommended BEFORE you call an Authorized Sunbeam Service Center. OpperisattheFineSetting, cannot H turn clockwise anymore · You can call us toll-free at the MR. cOFFEE® Consumer Service Department 1-800-MR. COFFEE® (1-800-672-6333) or you can visit us at www. [. . . ]