User manual MR HANDSFREE BLUE EAGLE 2

[. . . ] The unit is now in Standby mode and ready for use. When you turn off the ignition of your car, the Blue Eagle II is turned off automatically. You are required to pair the Blue Eagle II with your mobile phone before using it. Do the following steps to pair the Blue Eagle II with your mobile phone: Press and hold MFB in Standby mode (up to 10 seconds) until a prompt tone is heard and the red and blue LED's flash alternately. [. . . ] If you get a second call during a conversation, you will hear a "Beep" tone and you have the following two options: 1. Press MFB once to receive the second call and reject the current call. Press MFB twice to receive the second call and put the current call on hold. You can press MFB twice to switch between the 2 calls. Note: Some phones don't support this feature via Bluetooth®. When your phone and the carkit have just been paired, the volume level is set in the middle level automatically. You can press the Volume Up or Volume Down button or use your mobile phone (depending on your mobile phone) to adjust the speaker volume during a conversation. During adjusting, the icon varies according to the volume level. press the Volume Up / Volume Down button repeatedly to increase / decrease the speaker volume. OR Use the Volume Up / Volume Down button of your mobile phone to increase / decrease the speaker volume (depending on your mobile phone). When a call is received, the Blue Eagle II rings. At that moment, you can press the Volume Up or Volume Down button or use your mobile phone (depending on your mobile phone) to adjust the ringer volume. During adjusting, the icon varies according to the volume level. press the Volume Up / Volume Down button repeatedly to increase / decrease the ringer volume. OR Use the Volume Up / Volume Down button of your mobile phone to increase / decrease the ringer volume (depending on your mobile phone). When a call is received, the LCD display shows the caller's number, if your local telephone company provides the Caller ID service. The last 9 incoming numbers will be saved in the Caller ID list, and you can use the list to dial the numbers. If the memory is full, the oldest number will be replaced by the new one. In Standby mode, press the Volume Up / Volume Down button repeatedly to select the number that you want to call. During a call, you can transfer a call from the Blue Eagle II to your mobile phone or vice versa. When a call is received, press MFB to answer the call. press the Volume Up and Volume Down buttons simultaneously [A confirmation tone will be heard]. [. . . ] No charge shall be made to the customer for parts and/or repair labor. The product must be shipped to an authorized service center in its original and complete packaging, with transportation charges prepaid. Mr Handsfree will not assume responsibility for any losses or damages during transportation. To obtain repair or replacement within the terms of this guarantee, the customer must provide (a) a proof of purchase (e. [. . . ]