User manual MR HANDSFREE BLUE TWIN

[. . . ] Each Blue Twin headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You are usually required to enter the PIN-code 0000 in a pairing process with a Bluetooth® mobile phone or other devices; however it depends on the kind of Bluetooth® device that the headset is connected to. The Blue Twin headset must be turned off before initiating pairing. G Press and hold the MF-button (3) until the purple indicator (4) lights up constantly. [. . . ] You can also use the ear hook to find the most comfortable fit for your ear. Option 2: wearing the headset on your clothes (see iLLustration iii) Attach the clothing clip (9) to a piece of clothing as shown in ILLUSTRATION III. Make sure that the microphone (11) is directed towards your mouth. Now place the speaker (10) in your ear, so that you can start making phone calls. As soon as you finished making phone calls, you can also easily clip the speaker to a piece of clothing. Once the Blue Twin headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue Twin headset can be used with voice dialing if your mobile phone supports this feature. Press the MF-button (3), wait for a beep and say the name of the person you want to call. G Press the MF-button (3) again to cancel voice dialing. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. G Once the call has been set up, the sound will be transmitted to your headset automatically. When the Blue Twin headset is turned on and there is an incoming call, you will hear a musical tone. G Press the MFbutton (3) to answer the call or press and hold the MF-button (3) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (3) for 5 seconds to turn the headset on. G Then press the MF-button (3) again to answer the call. G To disable the Mute function, press the Volume-button (8) again until you hear a beep. Press and hold the MF-button (3) until you hear a beep to transfer the call to the mobile phone while talking on the headset. G If you want to transfer the call back to the headset, press the MF-button (3) again for 5 seconds. Press and hold the MF-button (3) for 3 seconds to switch to a second call during a call. This function only works when your mobile phone service provider provides this service (check with your network provider). [. . . ] No sound contact between the blue twin headset and other devices. Several bluetooth® devices appear on my mobile phone while searching the blue twin headset. Most Bluetooth® enabled mobile phones with Bluetooth® function activated can search for more than one Bluetooth® device within operative range. The headset will appear as "Blue Twin" on your mobile phone after having been found by your mobile phone. [. . . ]