User manual MR HANDSFREE BLUE VISION

[. . . ] insert the battery in the battery compartment as indicated in the illustration. Attach the sun visor clip to your Blue Vision if you are going to use the carkit in your car by fixing it on the sun visor. Plug the adapter jack into the carkit and the AC adapter or the cigarette plug into a power socket. A red or green light will light under the power button (4) when the charging process begins. [. . . ] To restore the connection between your mobile phone and the Blue Vision, both devices need to be turned on and they should be within 10 meters of each other. The following step depends on your mobile phone type: GB 5 For other phones it is necessary to restore the connection via the phone's menu. For all mobile phone types, it is recommended to set "Trust" or "Authorized" for Blue Vision in the Bluetooth® menu of your mobile phone. Please refer to the manual of your mobile phone for more detailed information. Before using the mr Handsfree Blue Vision make sure that: · Fix the carkit on the sun visor using the special clip and turn the microphone (7) to your mouth. This is the main working position of the microphone holder: the front microphone should be directed to your mouth and the rear microphone to the speaker phone metal shield. We advise not to change the microphone position during the activated call, since an echo effect could appear. If you follow this advice, you will have a comfortable duplex communication mode of your phone conversation. When no call is in progress, press the Talk button (5) once. You will hear a tone that indicates that you can say the desired name ("voice tag"). The phone plays the voice tag and dials the related phone number. You can also activate voice dialing with your phone. For details on voice dialing, please refer to your phone's user's manual. Please note that the voice dialing function is only available if it is supported by your mobile phone. Press the Reject button (6) to end the currently active call or end the call with your mobile phone. If the Automatic answer function is set on your phone, the phone automatically answers the incoming call after some rings. Press the Reject button (6) while no call is in progress. phone will dial the last dialed number. If you do not want to answer an incoming call, you can reject the call by pressing the Reject button (6). When your phone and the carkit just paired, the volume is set in the middle level automatically. press the Volume Up button (2) to increase the volume level or the Volume Down button (3) to decrease the volume. When the maximum or minimum level of the carkit's speaker is reached, you will hear a loud beep tone. [. . . ] Mr Handsfree will not assume responsibility for any losses or damages during transportation. ⷠTo obtain repair or replacement within the terms of this guarantee, the customer must provide (a) a proof of purchase (e. Dated bill of sale); (b) a written specification of the defect(s); (c) a return address and phone number. This limited guarantee does not cover and is void with respect to the following: (a) Products which have been subjected to improper installation, unauthorized repair, improper maintenance, unauthorized modifications or other acts which are not the fault of mr Handsfree; (b) Products which have been subjected to misuse, abuse, neglect, improper handling and storage, an accident or physical damage; (c) Products which have been subjected to fire, water, excessive humidity, sand, dirt, extreme changes in temperature or other conditions which are beyond the control of mr Handsfree; (d) Products which have been used with non-mr Handsfree approved accessories; (e) Products which have the serial number altered, defaced or removed; (f) Products which have been opened, altered, repaired or modified by any unauthorized service center. [. . . ]