User manual MR HANDSFREE BLUE XS

[. . . ] You are usually required to enter the PIN-code 0000 in a pairing process with a Bluetooth® mobile phone or other devices; however it depends on the kind of Bluetooth® device that the headset is connected to. The Blue XS headset must be turned off before initiating pairing. Press and hold the MF-button (2) until the blue indicator (1) lights up constantly. Initiate the pairing process on your Bluetooth® mobile phone to pair with the Blue XS headset. [. . . ] You can disconnect the headset from your phone when, for example, you want to use another Bluetooth® device with your phone. The Blue XS can be disconnected in the following ways: 1. Move the phone more than 10 meters away from the headset. Once the Blue XS headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue XS headset can be used with voice dialing and redial if your mobile phone supports this feature. Press the MF-button (2), wait for a beep and say the name of the person you want to call. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. be transmitted to your headset automatically. Once the call has been set up, the sound will Press and hold the volume-button - (3) for 3 seconds to redial the last number you called. When the Blue XS headset is turned on and there is an incoming call, you will hear a musical tone. Press the MFbutton (2) to answer the call or press and hold the MF-button (2) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (2) for 5 seconds to turn the headset on. The MF-button (2) again to answer the call. Note: Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue XS headset is turned on. In that case, the headset won't ring when there is an incoming call. To reconnect the headset with your mobile phone for an incoming call. Press and hold the MF-button (2) until you hear a beep to transfer the call to the mobile phone while talking on the headset. If you want to transfer the call back to the headset, press the MF-button (2) again for 5 seconds. Press and hold the MF-button (2) for 3 seconds to switch to a second call during a call. This function only works when your mobile phone service provider provides this service (check with your network provider). [. . . ] No sound contact between the Blue XS headset and other devices. Several Bluetooth® devices appear on my mobile phone while searching the Blue XS headset. Most Bluetooth® enabled mobile phones with Bluetooth® function activated can search for more than one Bluetooth® device within operative range. The headset will appear as "Blue XS" on your mobile phone after having been found by your mobile phone. [. . . ]