User manual MSI 880GMA-E53 4.1

[. . . ] ATI® is registered trademark of ATI Technologies, Inc. AMD® is registered trademarks of AMD Corporation. Intel® is registered trademarks of Intel Corporation. Windows® is registered trademarks of Microsoft Corporation. [. . . ] Primary Graphic's Adapter This setting specifies which graphic card is your primary graphics adapter. PCI Latency Timer This item controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. For better PCI performance, you should set the item to higher values. HPET The HPET (High Precision Event Timers) is a component that is part of the chipset. You can to enable it, and will provide you with the means to get to it via the various ACPI methods. VGA Share Memory The system shares memory to the onboard VGA card. This setting controls the exact memory size shared to the VGA card. UMA Location This function is used to select the location of UMA to avoid overlaping with the other data blocks in system memory. TCG/TPM SUPPORT Setting the option to [Yes] enables TPM (Trusted Platform Module) to the system. 3-10 MS-7623 Integrated Peripherals Chapter 3 USB Controller This setting allows you to enable/disable the onboard USB 1. 1/ 2. 0 controller. USB Device Legacy Support Select [Enabled] if you need to use a USB-interfaced device in the operating system. Wake Up Event Setup Press <Enter> and the following sub-menu appears. Wake Up Event By Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS. Resume From S3 By USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Resume From S3 By PS/2 Keyboard/ Mouse This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 keyboard/ mouse is detected. Resume By PCI Device (PME#) When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PME (Power Management Event). Resume By PCI-E Device When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIE device. Resume By RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date. 3-14 MS-7623 H/W Monitor Chapter 3 Chassis Intrusion The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. To clear the warning message, set the field to [Reset]. The setting of the field will automatically return to [Enabled] later. CPU FAN This item allows you to select the CPU FAN type. CPU Smart FAN Target The mainboard provides the Smart Fan function which can control the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. [. . . ] · If you allocate the first LD capacity manually, you can create second LD with remaining capacity of the selected hard drives. B-5 AMD RAID 6. The LD creation is done, the screen shows the LD information as below. Press ESC key to the main screen. 7. Press ESC key to exit the utility, a message "System is going to REBOOT!Are You Sure?" will display, answer "Y" to exit it and the system will reboot. B-6 MS-7623 Delete LD (Deleting RAID) 1. [. . . ]