User manual MSI AG2712A-027EU

[. . . ] AG2712A All-in-One (AIO) PC MS-AF15 System G52-AF151X6 Preface Contents Copyright Notice iii Trademarks iii Revision iii Upgrade and Warranty iv Acquisition of Replaceable Parts iv Technical Support iv Green Product Features iv Environmental Policy v Chemical Substances Information v Battery Information v Safety Instructions vi CE Conformity viii FCC-B Radio Frequency Interference Statement viii WEEE Statement ix 1. Overview 1-1 Packing Contents 1-2 System Overview 1-3 System Specifications 1-9 Component Replacement & Upgrade 1-11 ii 2. Getting Started 2-1 Safety & Comfort Tips 2-2 Hardware Setup 2-3 3. System Operations (Windows 7) 3-1 System Booting Setup for the first time 3-2 Network Connection under Windows 3-3 THX TruStudio PRO (Optional) 3-8 On-Screen Display (OSD) 3-11 Power Management 3-14 System Recovery Tool 3-16 4. [. . . ] After the settings are done, press the Mode button to exit. Adjusting contrast and brightness Adjusting color System Operations (Windows 7) Adjusting phase/focus & clock/pitch Adjusting screen position Adjusting signal source Adjusting OSD position & timeout 3-12 Specifying language Scenery mode All-in-One PC Resetting system Adjusting wide screen mode 2. Press the Up & Down buttons to adjust the system volume. 3. Press the Mode button to view the signal source. Press it again to select PC/ HDMI/ monitor off mode. 3-13 Important Whenever any error takes place and incurs abnormal display or volume malfunction, enter the OSD menu and reset your monitor to restore all settings to manufacturer default for optimal performance. System Operations (Windows 7) Power Management Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to sleep mode after a period of user inactivity.  Power Management in Windows OS ■ [Power Options] in Windows OS allow you to control the power management features of your display, hard drive, and battery. Go to [Start] > [Control Panel] > [System and Security]. 3-14 Then click on the [Power Options] link. Select a power plan that suits your personal needs. You may also fine-tune the settings by clicking [Change plan settings]. All-in-One PC ■ The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut Down (S5) for rapid and easy management of your system power.  Power Management through ENERGY STAR qualified monitors (Optional) The power management feature allows the computer to initiate a low-power or “Sleep” mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power: ■ ■ Turn off the display after 15 minutes Initiate Sleep after 30 minutes 3-15  Waking the System Up The computer shall be able to wake up from power saving mode in response to a command from any of the following: ■ ■ ■ ■ the power button, the network (Wake On LAN), the mouse, the keyboard. Energy Saving Tips: ■ ■ ■ ■ Turn off the monitor by pressing the LCD power button after a period of user inactivity. Tune the settings in Power Options under Windows OS to optimize your PC’s power management. Install power saving software to manage your PC’s energy consumption. Always disconnect the AC power cord or switch the wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption. System Operations (Windows 7) System Recovery Tool Important The Recovery Tool is only available on systems bundled with Windows OS and MSI utilities by default. The purposes for using the Recovery Tool may include: ■ ■ ■ ■ Restore the system back to the initial status of original manufacturer’s default settings. When some errors have occurred to the operating system in use. When the operating system is affected by virus and is not able to work normally. When you want to install the OS with other built-in languages. Before using the System Recovery Tool, please backup the important data saved on your system drive to other storage devices. If the following solution fails to recover your system, please contact the authorized local distributor or service center for further assistance. 3-16  Recovering the System with the F3 Hotkey If the system encounters non-recoverable problems, it is always recommended that you try the F3 hotkey to recover your system with the recovery partition of the hard disk drive first. Follow the instructions below to continue: 1. Press the F3 hotkey on the keyboard when the following image appears. All-in-One PC 3. This tool contains three features: Backup System, Restore System and Recover to factory default.  System Backup It is highly recommended that users back up the system as the solution in the event of a catastrophic disk failure or other accidents. Follow the instructions below to continue: 1. Alternatively, select [X] or press [Esc] on the keyboard to exit. 3-17 System Operations (Windows 7) 2. [. . . ] For built-in microphone, please go to Start > Control Panel > Sounds and Audio Devices > Audio to check if it is muted. If you are using an external microphone, check that the microphone is plugged into the Microphone jack. The Internet connection has problems. 1. If you are having a problem connecting to your Internet Service Provider (ISP), check if the ISP is experiencing technical problems. Check the Network settings and connection and make sure the system is properly configured to Internet access. [. . . ]