User manual MSI G52-73951XB V1.3

[. . . ] AMD® is a registered trademark of Advanced Micro Devices, Inc. AMI® is a registered trademark of American Megatrends, Inc. AtI® is a registered trademark of AtI technologies, Inc. Award® is a registered trademark of Phoenix technologies ltd. [. . . ] You can connect a network cable to it. Yellow Green/ Orange LED Left Color Yellow LED State Off On (steady state) On (brighter & pulsing) Condition LAN link is not established. The computer is communicating with another computer on the LAN. 1000 Mbit/sec data rate is selected. Right Green Off On Orange On 11 VESA Mount Hole (Optional) - Please remove the rubber on VESA mount hole to wall mount the AIO PC. 1-7 Overview Side View 1 2 3 4 5 6 1 Ventilator - The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating. Do not cover the ventilator. 2 Eject Button/ ODD LED - Press the eject button to open the optical disk drive. The ODD LED is on when CD/ DVD is read from or written to the optical disk drive. 3 Optical Disk Drive - A DVD Super-Multi drive is integrated for your home entertainment. 1-8 MS-A912 4 USB Ports - The USB (Universal Serial Bus) port is provided for attaching USB devices such as mouse, keyboard, printer, scanner, camera, PDA or other USB-compatible devices. 5 Card Reader Drive - The built-in card reader may support various types of memory card, such as XD (eXtreme Digital), SD (Secure Digital), SDHC (SD High Capacity), MS (Memory Stick), MS Pro (Memory Stick Pro) or MMC (Multi-Media Card) cards that usually used in devices like digital cameras, MP3 players, mobile phones and PDAs. Contact the local dealer for further information and please be noted that the supported memory cards may vary without notice. 6 Stand - Use this stand to position your system on a flat and stable surface. 1-9 Overview Mainboard SpecificationS Processor Intel® AtomTM Single/ Dual-Core Processor D410/ D510 (Optional) Chipset South Bridge: Intel® NM10 Express Chipset Memory 1 DDR2 667 SO-DIMM slots (200-Pin/ 1. 8 V) Supports the maximum 2GB LAN Gigabit Fast Ethernet by Realtek® RTL8111DL GbE controller Audio Chip integrated by Realtek® ALC888S Compliant with Azalia 1. 0 spec Form Factor 430 mm (W) X 85 mm (H) 1-10 MS-A912 SySteM SpecificationS LCD Display 18. 5" TFT LCD display with an optimal resolution of 1366 X 768 Standard proportion of 16:9 widescreen (Full HD) Input/ Output (I/O) 1 LAN jack 1 power jack 2 PS/2 ports 2 audio jacks 4 USB ports Power Supply 65 watt AC/ DC adapter with active PFC Delta/ ADP - 65HB BB Input: 100-240V~, 50-60Hz, 1. 5A Output: 19V 3. 42A Stereo Speaker 2 internal stereo speakers 3W Built-In Card 1 WLAN card (Optional) Built-In Drive 1 card reader drive 1 optical disk drive 1 hard disk drive Dimension 453 mm (W) X 420 mm (H) X 35 mm (D) (with stand) 453 mm (W) X 380 mm (H) X 35 mm (D) (without stand) 1-11 Overview Component ReplaCement & UpgRade Please note that certain components preinstalled in the product may be upgradable or replaceable by user's request depending on the models users purchased. 4 2 3 1 1 Memory 2 Hard Disk Drive 1-12 MS-A912 3 Wireless LAN Card 4 Optical Disk Drive If the specified component has been determined by the MSI engineer or store as problematic or defective and may incur the need for replacement, you may bring the product for repair along with the warranty card, purchase invoice or receipt to the MSI-authorized service center closest to your location for assistance. To learn more about upgrade limitation, please refer to the specifications in the User's Manual. For any further information on the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center, since it may cause the warranty void. It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service. 1-13 Chapter 2 Getting Started This chapter provides you with the information on hardware setup procedures. While connecting peripheral devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Getting Started Safety & Comfort tipS The AIO PC is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your PC for a long period of time. For more instructions or detailed steps on connecting to the Wireless LAN, please ask your MIS staff or network manager for help. 2-8 MS-A912 ConneCting Power Connecting the AC Power Step 1. Unpack the package to find the AC/ DC adapter and AC power cord. Assemble the AC/DC adapter and the AC power cord. Plug the DC end of the adapter to the AIO PC, and the male end of the AC power cord to the electrical outlet. Important We suggest that you connect the AC/DC adapter to your AIO PC first and then connect the AC power cord to the socket-outlet for safety concerns. Disconnecting the AC Power Step 4. Unplug the AC power cord from the electrical outlet first. Disassemble the AC power cord and the AC/DC adapter. Important When unplugging the AC power cord, always hold the connector part of the cord. Never pull the cord directly! 4 1 5 2 3 6 2-9 Chapter 3 System Operations This chapter provides you with essential information on system operations, such as system boot setup, recovery disk creation, network connection, SRS Premium Sound, and so on. Important · It is highly recommended that you create a system recovery disk as the backup solution in the event of a catastrophic disk failure or other accidents. · All information is subject to change without prior notice. System Operations SyStem Booting Setup for the firSt time For the first-time use, you will need to go over the following steps to start using your Wind Top Series AIO PC. The entire booting setup will take you around 30 minutes. Please wait until Windows setup finishes the progress loading. Select the language of the operating system and click [Next] to continue. [. . . ] Recover the System with the F3 Hotkey If the system encounters non-recoverable problems, it is always recommended that you try the F3 hotkey to recover your system with the recovery partition of the hard disk drive first. Follow the instructions below to continue: 1. Press the F3 hotkey on the keyboard when the following image appears. 3-20 MS-A912 3. Select [Windows Setup] from the Windows Boot Manager menu. 4. [. . . ]