User manual MTD 1015-2

[. . . ] • Shut off engine before unclogging tines or making repairs. • Keep bystanders away from machine. • Keep away from rotating parts. Safety Before installing the attachment, carefully review the Safety and Operating instructions in the VersaTiller™ Owner’s Manual. Parts List Check the parts you received with the items shown in Figure 1 and listed below. [. . . ] If any parts are missing or damaged, contact us immediately. Ref. No. A B C D E Installation Steps WARNING Qty. TO AVOID INJURY: • Before installing or removing the attachment, shut the engine off, allow it to cool, disconnect the spark plug wire and prevent it from touching the spark plug. • Wear gloves when handling the tines. They may be sharp. Part No. 1911420 1911450 1911446 GW-9380 GW-9338 Description Border Edger Tine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Wheel Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Clevis Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hair Pin Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Swing handlebars around so they are positioned over the engine— in the front tine cultivator mode position. Remove the tine hood by taking out the hair pin clip and the release pin securing the front of the hood. Secure the clevis pin with a hair pin clip (E). 7. The Border/Edger attachment is now installed and ready for use. When edging jobs are complete, remove the edger attachment and reinstall the four tine gangs. Tighten tine gang hardware securely. Operation WARNING TO AVOID INJURY: • NEVER operate the machine when barefoot or when wearing sandals, sneakers or other lightweight footwear. ALWAYS wear footwear that will protect your feet and improve traction. • NEVER carry the machine when the engine is running. Always shut the engine off before transporting the machine. The Border/Edger Attachment allows you to make clean, sharp edges wherever grass meets a walkway, driveway, terrace, patio, or the edges of planting beds. [. . . ] • NEVER carry the machine when the engine is running. Always shut the engine off before transporting the machine. The Border/Edger Attachment allows you to make clean, sharp edges wherever grass meets a walkway, driveway, terrace, patio, or the edges of planting beds. It’s an extremely handy landscaping and yard care tool that attaches quickly to your equipment. [. . . ]