User manual MTD 1057

[. . . ] All the information in this manual is relative to the most recent product information available at the time of printing. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. [. . . ] If you have any problems or questions concerning this product, phone your local authorized MTD service dealer or contact us directly. MTD’s Customer Support telephone numbers, website address and mailing address can be found below. We want to ensure your complete satisfaction at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with your machine, for more information. Customer Support Please do NOT return this bumper kit to the retailer or dealer without first contacting our Customer Support Department. If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of your machine, you can seek help from the experts. Choose from the options below: ◊ ◊ ◊ Visit us on the web at www. mtdproducts. com Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 Write us at MTD LLC • P. O. Box 361131 • Cleveland, OH • 44136-0019 Determine The Model of Your Rider This manual is designed for installation of your new bumper kit attachment on several different tractors. Place the PTO in the disengaged (OFF) position, stop the tractor engine and set the parking brake. NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end. 3 Mounting Bumper to Model Year 2006 and Prior 700 Series Tractors WARNING: Muffler may be hot!Make sure engine has cooled down before installing bumper. To mount the bumper to the tractor, slide the bumper over the front brackets, aligning the top-rear holes in the Mounting Bumper to all Model 600, 800 and Model year 2007 & Newer 700 Tractors WARNING!Make sure engine has cooled down before installing bumper. NOTE: On some older units, a shoulder bolt may already be present. Install the two shoulder bolts onto the tractor as seen in Hex Bolt Shoulder Bolt Figure 3-2 bumper over the upper rear holes in the bracket. Quick Release Pin Shoulder Bolt Figure 3-1 Fig. 3-1, and secure with two flange lock nuts from the hardware pack. [. . . ] 3-1, and secure with two flange lock nuts from the hardware pack. To mount the bumper to the tractor, hook the notched ends (slots) of the bumper onto the shoulder bolts on the sides of the tractor frame. Align the holes in the bumper with the holes in the tractor frame and insert the quick release pin through the top hole of the bumper assembly from the outside as seen in Fig. [. . . ]