User manual MTD 5012-6

[. . . ] Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. 7 PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS All information, illustrations, and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. Inside Back Cover SERVICE INFORMATION Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer. [. . . ] €¢ Do not overreach, take extra care when working on steep slopes or inclines. €¢ Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips. €¢ Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the tines when they are rotating. €¢ Do not operate the engine faster than the speed needed to do the job. Do not run the engine at high speed when not in use. €¢ Always stop the engine/motor when operation is delayed or when walking from one location to another. €¢ Stop the engine/motor for maintenance, repair, to install or remove the tines. The unit must be stopped and the tines no longer turning to avoid injury. €¢ The tines become very sharp from use. Also inspect the connections for damage. Replace the cords if any defects or damage appear. €¢ Prevent disconnection of the cultivator powerhead from extension cord during operation by using a plugreceptacle retaining strap, connector, or by making a knot as shown below: Extension Cord Cultivator Cord Extension Cord Cultivator Cord WHILE OPERATING • Keep bystanders, especially children and pets, at least 50 ft (15 m) away. €¢ Wear safety glasses or goggles that are marked as meeting ANSI Z87. 1 standards, and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty. MAINTENANCE AND STORAGE • Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting. €¢ Store the unit in a locked up and dry or high and dry place to prevent unauthorized use or damage, out of the reach of children. 4 RULES FOR SAFE OPERATION • Clean the tines with a hose and water. Wipe the tines with a light machine oil to prevent rust. [. . . ] Stagger Tips TRANSPORTING • Allow the unit to cool before transporting. €¢ Secure the unit while transporting. Felt Washer For gas powerhead units • Drain fuel from unit. 8" 9 MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD LLC (“MTD”) with respect with new merchandise purchased and used in the United States, its possessions and territories. [. . . ]