User manual MTD Z-42

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] Yy USB port of the unit cannot be connected to PC. The unit cannot be used as a storage device. Yy Some USB may not work with this unit. : The button is not available for any function. • • • • • • b • • • • • • PRESET/FOLDER W/S : -- Searches for a folder of MP3/ WMA files. When a CD/ USB containing MP3/ WMA files in several folders is being played, press PRESET/FOLDER W/S to select the folder you want to play. -- Searches for a section within a track/file. : The button is not available for any function. The tag gives the Title, Artist, Album or Time information. Remove the battery cover on the rear of the Remote Control, and insert one (size AAA) battery with 4 and 5 matched correctly. IN Listens to music from your portable device. In stop status, press PRESET/FOLDER W/S on the remote control repeatedly until a desired folder appears. (During playback, if you selecting a folder you want, this step is not neccessay. ) yy USB and CD Folders/Files are recognized as below. Directory *ROOT File File_03 File_04 File_05 File_06 File_07 File_08 File_09 File_10 File_01 File_02 yy Files and folders will be presented in order recorded and may be presented differently according to the record circumstances. Yy *ROOT : the first screen you can see when a computer recognize the USB is “ROOT” yy Folders will be presented as the following order; FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_06 -> FILE_07 -> FILE_08 -> FILE_09 -> FILE_10 CD : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_08 -> FILE_09 -> FILE_06 -> FILE_07 -> FILE_10 Note , , 3 Operating Z-42-DU_ADEULLK_ENG. Indd 13 2012-12-11 10:24:58 14 Operating Other Operations Programmed Playback The program function enables you to store your favorite files from any disc or USB device. Repeat steps 3-4 to select a next track/file. Press d/M to play the programmed music tracks/files. To clear your selection, press Z on the remote twice. The programs are also cleared when the disc or USB device is removed, the unit is powered off or the function is switched to others. Displaying file information (ID3 TAG) While playing an MP3 file containing file information, you can display the information by pressing INFO. [. . . ] Check the condition by operating other electronic devices. Use the Volume Knob to adjust the volume. 4 Troubleshooting The unit does not start playback. Place the disc with the label or printed side facing upwards. [. . . ]