User manual MTD 60111

[. . . ] Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. 8 PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS All information, illustrations, and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. 18 SERVICE INFORMATION Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer. [. . . ] Allow the engine to cool down by idling. Put the On/Off Stop Control in the OFF (O) position (Fig. 8 9 OPERATING INSTRUCTIONS OPERATING THE EZ-LINK™ SYSTEM The EZ-Link™ system enables the use of these optional Add-Ons. TBBC* *Do NOT use this attachment with an electric powered product. Before you begin using any attachment, read and understand the manual that came with the attachment. Follow all safety information contained within. While firmly holding the add-on, push it straight into the EZ-Link™ coupler (Fig. NOTE: Aligning the release button with the guide recess will help installation (Fig. CAUTION: Lock the release button in the primary hole (Fig. 10) and securely tighten the knob before operating this unit. 90˚ Edge Trimming Hole To avoid serious personal injury and damage to the unit, shut the unit off before removing or installing add-ons. To release more line, lightly tap the cutting attachment on the ground (Fig. 13) while operating the trimmer at high speed. NOTE: Always keep the trimming line fully extended. Line release becomes more difficult when the cutting line gets shorter. dECORATIVE TRIMMING Decorative trimming is accomplished by removing all vegetation around trees , posts , fences and more. Rotate the whole unit so that the cutting attachment is at a 30° angle to the ground (Fig. 13 Each time the head is bumped, about 1 inch (25. A blade in the cutting attachment shield will cut the line to the proper length if any excess line is released. For best results, tap the bump knob on bare ground or hard soil. If you attempt a line release in tall grass, the engine may stall. Always keep the trimming line fully extended. [. . . ] The manufacturer is not liable to cover failures of warranted parts caused by the use of add-on or modified parts. € In order to file a claim, go to your nearest Authorized Cub Cadet Service Center. warranty services or repairs will be provided at all Authorized Cub Cadet Service Centers. € Any manufacturer approved replacement part may be used in the performance of any warranty maintenance or repair of emission related parts and will be provided without charge to the owner. [. . . ]