User manual MTD OEM-190-110

[. . . ] Grass Bag Hook Hex Bolt 1/4-20 x . 62" Lg. * L-Wash. 1/4" I. D. * Hex Nut 1/4-20 Thd. * *For faster service obtain standard nuts, bolts and washers locally. [. . . ] Lay the grass bag so the black plastic side is to the bottom. Insert the long end of the upper frame into the cloth channel in the grass bag, starting at the point shown in figure A. Feed all the material onto the long side of the frame. Then insert the long end of the frame inside the bag as you work the bag around the frame. Insert the other end of the frame inside the bag. Place one tube support inside the grass bag. Insert one end of the upper frame into the tube support. Attach the other tube support in the same manner. Slide the ends of the lower frame assembly into the tube supports as shown in figure E. Tap on with a soft hammer or mallet if necessary. Secure the bag to lower frame assembly as shown in figure F by working the plastic channels on bag over frame, starting with the bottom edge. Place belleville washer onto self-tapping screw (crowned side of washer goes against the head of screw). [. . . ] Carefully lower the chute deflector (or mulching plug) into operating position. Empty the grass through the top opening on the grass catcher. [. . . ]