User manual MTD U05050

[. . . ] SAVE THESE INSTRUCTIONS SERVICE INFORMATION Shown in Blower Mode DO NOT RETURN THIS PRODUCT Please call the Customer Support Department or visit our website for assistance: U. For assistance regarding the assembly, controls, operation or maintenance of the unit, please call the Customer Support Department. Additional information about the unit can be found on our website. For service, please call the Customer Support Department to obtain a list of authorized service dealers near you. [. . . ] Damaged parts should be properly repaired or replaced by an authorized service center, unless otherwise indicated in this manual. € Use only original manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of the product. Failure to do so may cause poor performance and possible injury. € Be sure to secure the unit while transporting. € When not in use, store the unit indoors in a locked-up and dry, or high and dry, place to prevent unauthorized use or damage. € Keep the handles dry, clean and free from debris, oil and grease. Never douse or spray the unit with water or any other liquid. Do not use solvents or strong detergents. € SAFETY AND INTERNATIONAL SYMBOLS • This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating, maintenance and repair information. sYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger , warning or caution. Connect the extension cord plug to the outlet. Disconnect the extension cord plug from the outlet. Remove the loop in the extension cord from the cord hook. Disconnect the power cord plug from the extension cord (Fig. Central / Main Handle Blower Conversion Cord Retainer Front Handle Blower Outlet Vacuum Door Power Cord Vacuum Conversion Shoulder Harness Rear Handle Vacuum Bag Assembly Upper Vacuum Tube Lower Vacuum Tube Vacuum Inlet STARTING AND STOPPING INSTRUCTIONS STARTING THE MOTOR The unit is equipped with a variable-speed switch. Turn the variable-speed switch clockwise to start the motor (Fig. Continue turning the variable-speed switch clockwise to increase the motor speed as needed (Fig. Turn the variable-speed switch counter-clockwise to reduce the motor speed. When the variable-speed switch cannot be turned counter-clockwise any more, the motor should stop (Fig. UNPACKING • Carefully remove the product and any accessories from the box. € Inspect the product carefully to make sure no breakage or damage occurred during shipping. [. . . ] Empty the vacuum bag Clean the vacuum bag Replace the vacuum bag Zip up the vacuum bag The vacuum bag is full The vacuum bag is dirty The vacuum bag is torn The vacuum bag is unzipped NOTE: For maintenance beyond the minor adjustments listed above, or for replacement parts, please call the Customer Support Department at 1-800-828-5500 (U. 6 lb 12 oz (3 kg) * All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. Cuando use el equipo como sopladora • NO use nunca la unidad para rociar productos químicos, fertilizantes u otras sustancias que puedan contener materiales tóxicos. [. . . ]