User manual MTD UO845

[. . . ] Carefully study this manual to get familiar with the instructions and information contained in it. These instructions and information are helpful in using your tractor correctly and safely, and avoiding personal injury and other accidents during operation and servicing of the tractor. When using any implement together with your tractor, also carefully study its operation manual so that you can use it safely, correctly and efficiently. This manual is organized with sections arranged in a particular order so that you can better understand the safety messages and the controls on your tractor to help you operate your tractor correctly and safely. [. . . ] ●Long-term usage of the 12V DC outlet with the engine stopped causes the battery to run out. 3014903o (A) Sc2400 Operator’s Manual 8-20 9. WARNING ALWAYS ensure all moving components have stopped rotating before connecting, disconnecting, adjusting, cleaning or servicing any Power Take Off (PTO)-driven implement. ALWAYS ensure the Power Take Off (PTO) shaft cover is installed. ALWAYS wait until the shaft has completely stopped moving before attempting to replace the Power Take Off (PTO) shaft cap. ALWAYS follow the Power Take Off (PTO)-driven implement operation manuals and safety decals and instructions before installing or operating any Power Take Off (PTO)-driven implements. ALWAYS set the parking brake securely and put wheel chocks in front and behind the rear wheels. NEVER approach or touch any rotating component. 1. WARNING ● Before connecting, disconnecting, adjusting or cleaning any Power Take Off (PTO)-driven implement, be sure to disengage the Power Take Off (PTO), shut down the engine, and make sure that all the components have stopped their rotation. ● Do not approach rotating drivelines. ● Entanglement with a rotating driveline can lead to serious injury or even death. ● Keep hands, feet and clothing away from the rotating driveline. Press the reverse-override-switch to enable the reverse override function. The switch illuminates and the Mid-Power Take Off (PTO) and the Rear Power Take Off (PTO) can be driven during reverse movement. (A) Reverse-override-switch !CAUTION ●Once the reverse-override-switch is activated, the reverse override function cannot be disabled unless the engine is stopped. (A) 3014919f 9-5 Sc2400 Operator’s Manual 10. WARNING ALWAYS install an appropriate counterbalance to the front of the tractor, if necessary, when using a 3point hitch-mounted implement. During transportation, put the 3-point hitch control/ cutting height adjustment lever in its raised position and lock it with the position stop knob. Do not fully close the hydraulic flow control/stop knob. ALWAYS use implements designed for a 3-point hitch. NEVER use unapproved implements with the 3-point hitch. Contact your local Cub Cadet Yanmar dealer for technical assistance. 1. WARNING Avoid injury: ●Make sure to stop the engine and then remove the key. Make sure that the engine has been stopped completely. [. . . ] 5-11 ● Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1 ● Brake Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 ● Coolant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-36 ● Cruise Control Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]