User manual MTD Z54L

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] • • • • • • • • • • b• • • • • • • • • • • SCAN (c/v): Searches backward or forward. SKIP (C/V): Goes to the next or previous chapter / track / file. • • • • • • • • • • c• • • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. TITLE: Accesses the disc’s title menu, if available. (Type A, High Speed HDMI™ Cable) Resolution Setting You can change the resolution using RESOLUTION button. yy The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit. yy For 720p, 1080p and 1080i resolution on the component / progressive scan output, only noncopy protected discs can be played back. If the disc is copy protected, it will be displayed at the 576p(480p) resolution. yy Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. 3 System Setting [LANGUAGE] Menu Menu Language Select a language for the Setup menu and onscreen display. Disc Audio/Disc Subtitle/Disc Menu Select a language for the Disc Audio/Disc Subtitle/ Disc Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER (b) to enter the corresponding 4-digit number according to the language code list. (See page 21) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle. Z54L-P_MFL67859911_DEU_Eng_1. 0. indd 13 2013-02-01 1:54:15 14 System Setting [AUDIO] Menu Set the player’s Audio options according to various disc output type you use. Password Sets or changes the password for lock settings. Dolby Digital / DTS / MPEG Select the type of digital audio signal to use the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select to connect DIGITAL AUDIO OUTPUT jack to an amplifier with Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select to connect DIGITAL AUDIO OUTPUT jack to an amplifier without Dolby Digital or MPEG decoder. [Off] (for DTS): Select to connect DIGITAL AUDIO OUTPUT jack to an amplifier without DTS decoder. Area Code To input the standardized area code referring the Area Code List on page 20. [OTHERS] Menu B. L. E (Black Level Expansion) Select On or Off to expand the black level or not. It just operates when TV system is set to NTSC. 3 System Setting DivX(R) VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX videos. [. . . ] Display file information (ID3 TAG) While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly. yy Depending on the MP3 files, information may not be displayed on the screen. 4 Operating Z54L-P_MFL67859911_DEU_Eng_1. 0. indd 17 2013-02-01 1:54:16 18 Operating Photoi To View photo files as a slide show Adjust slide show speed Do this Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show. You can change slide show speed using a/d when (J) icon is highlighted. Rotate a photo Use w/s to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Watch an While viewing a photo in full enlarged Photo screen, press ZOOM repeatedly to select zoom mode. [. . . ]