User manual MTD ZYJ1395A

[. . . ] This operator’s manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. I. TABLE OF CONTENTS Rules for Safe Operation . Attaching and Removing the Blower/Vacuum Tube . Installing and Adjusting the Shoulder Strap . [. . . ] Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. Remove the 2 (two) self-tapping screws from either side of the housing. Remove the 2 (two) screws and nuts holding the blower/vacuum tube on the housing (Fig. NOTE: Keep the hardware in a safe place for future use. WARNING: To avoid serious personal injury, be sure the unit is in the off position and unplugged before assembling tubes. 1. Remove the screws and nuts provided from the hardware pack. Insert the blower/vacuum tube all the way into the opening on the motor housing until the holes in the tabs on the blower/vacuum tube align with the screw holes in the housing (Fig. Insert the 2 (two) 8-32 x 3/4” slotted T20 Torx screws into the right side of the motor housing and the 2 (two) nuts into the left side of the motor housing (Fig. 2). Motor Housing Screw and Nut Nut Blower/Vacuum Tube Fig. 2 Screw and Nut Self Tapping Screw 3. Remove the blower/vacuum tube from the motor housing. Replace Blower/Vacuum Tube before use. Screw Self-Tapping Screw Fig. • Slide the switch all the way down for OFF. • Slide the switch up to the first click for LOW. • Slide the switch up to the second click for HIGH. HIGH LOW OFF WARNING: To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. This unit plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into a polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the unit plug, extension cord receptacle, or extension cord plug in any way. 1. [. . . ] 0. 75 bushels (26. 4 L) ACCESSORIES/REPLACEMENT PARTS Vacuum Bag . 682075 TROUBLESHOOTING UNIT WILL NOT BLOW OR VACUUM CAUSE Bag Full Blocked Tube Blocked Impeller Damaged Impeller Dirty Bag Torn Bag Bag Unzipped Unplugged ACTION Empty Bag. See Clearing a Blocked tube/Impeller, Pg 14. See Clearing a Blocked tube/Impeller, Pg 14. [. . . ]