User manual MTD ZYJ50AB

[. . . ] Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. 11 PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS All information, illustrations, and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. Inside Back Cover SERVICE INFORMATION Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer. [. . . ] • This saw is classified by CSA as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an anti-vibration feature. €¢ Safety clothing required by your safety organizations, government regulations, or your employer should be used; otherwise, snug fitting clothing, safety footwear, and hand and ear protection should be worn. Low-kickback saw chain is chain that has met the kickback performance requirements of ANSI B175. Do not use other replacement chain unless it has met these requirements for your specific model. €¢ Do not use any other cutting attachment or accessories. Use only original equipment manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of our products. Failure to do so may cause poor performance and possible injury. Use only the chain and bar supplied with this product. May be used in conjunction with other symbols or pictographs. SYMBOL MEANING • THROWN OBJECTS CAN CAUSE SEVERE INJURY WARNING: Do not operate unit without proper attachments and guards in place. €¢ WARNING - READ OPERATOR'S MANUAL Read the Operator’s Manual(s) and follow all warnings and safety instructions. CAUTION: Lock the release button in the primary hole (Fig. 2) and securely tighten the knob before operating this unit. Remove the hanger from the top of the shaft housing. While firmly holding the add-on, push it straight into the coupler (Fig. Coupler Release Button Guide Recess CAUTION: The add-ons with the coupler system is to be used in the primary hole only. Using the wrong hole could lead to personal injury or damage to the unit. The add-on should be installed with the release button in the primary hole. If the add-on is not operating, remove add-on and repeat steps for installing the add-on. [. . . ] See your TrimmerPlus Authorized Service Center to have this repair performed. Low-Kickback Saw Chain A low-kickback saw chain is a chain which has met the kickback performance requirements of ANSI B175. Do not use other replacement chain unless it has met these requirements for your specific model. By keeping the saw chain in good working condition and correctly serviced as recommended in this manual, you will be able to maintain the safety system of your chain saw over the life of the product. [. . . ]