User manual MURATEC M-4700

[. . . ] In the Energy Saving Mode the printer will not use its fusing lamp. If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 240 minutes. For details, see "EasyStart, " page 1. 17. Super G3 is an extension of Group 3 fax technology standards, allowing the use of high-speed ITU-T V. 34 modems for 33. 6 Kbps transmission and high-speed protocols for rapid handshaking. [. . . ] When the message appears as you want it, press [Enter] to save it. Fax Message From: Nov 26 2001 14:00 Name: AABBCC Co. Fax Number: 123-4567 [We appreciate your business. Thank you!] 3 Turning the cover page on Printing the cover page To confirm that the cover page is set correctly, print a sample cover page from your fax machine. Press MENU, K, [List]. 1 2 Press MENU, K, [Setting]. To tell the fax machine it should send a cover page before each document you transmit, select "ON" by using the cursor key. Note: To tell the machine not to send a cover page, select "OFF" and press [Enter]. Press [Enter] to save the setting. 3 Now the cover page feature is working but your message line (shown in the example as "We appreciate your business. To enter that message, see "Entering the cover page message, " below. 3. 38 Advanced fax Separate each received document (Separator Page) Your machine has a simple sorting feature. It can separate each received document by inserting the separator page on the top of the received document. For example, if you use the colored paper for the separator page, it is easy to see the individual received document. Note: You can assign the turning this feature on/off to a Soft Key. To set up page numbering: 1 2 Press MENU, G, [Enter]. Select "ReportType" then press [Enter]. Press [Enter] to save the setting. Press [#OfPages]. Use the numeric keypad to enter the number of pages in your document. Press [Enter]. 5 To print the selected report automatically after every fax you send, select "Report", and then press [Enter]. From here, continue sending the document using whatever type of transmission you need (broadcast, group dial, etc. ). When the remote fax machine prints the document, a note on the right side of your TTI will indicate the number of the page -- such as "P. 02" for page two. 6 7 Select "ON" using the cursor key. Press [Enter] to save the setting. To turn the confirmation report feature on or off for only the next fax transmission, press REPORT. What happens next depends on the setting you chose: If the light next to the REPORT key glows, the fax machine will print the confirmation report automatically. If the light next to the REPORT key doesn't glow, the fax machine will not print a confirmation report. After you send this transmission, your machine returns to the setting you chose in step 2, above. 3. 41 Fax Features Getting Started 3 4 Select confirmation report type "TCR" or "RCR" by using the cursor key. 1 2 3 4 5 6 7 Count the number of pages in your document. Adjust the resolution and contrast, if necessary. Press NEXT until [#OfPages] is appeared. Advanced fax OneLine + distinctive ring detection Many phone companies now offer their customers a special service which makes it possible for one phone line to do the work of two. [. . . ] The warranty shall not apply to adjustments, repairs or replacements necessitated by any cause beyond the control of Muratec (whether foreseeable or not) including, but not limited to, any malfunction, defects or failure caused by or resulting from any of the following: improper unpacking or installation, unauthorized service or parts, or improper maintenance or cleaning, modification or repair by the Customer, accident (including, without limitation, unavoidable accidents), fire, flood or other Acts of God, improper telephone or electrical power or surges thereof, interconnection with or use of non-compatible equipment or supplies (including paper), or placement of the product in an area which does not conform to Muratec space, electrical and/or environmental requirements. Muratec will not be required to make adjustments, repairs or replacements if the product is installed or used at a location deemed by Muratec to be hazardous to health or safety, or if Muratec is not provided with free and reasonable access to the product and a telephone during service availability hours, or if the product location is not accessible by an authorized Muratec service vehicle. AI. 10 Appendix and index Index A Alarm light . 2. 15 Directional ratio(%) magnification . 2. 15 Directional size (inch) magnification . [. . . ]