User manual MURATEC M-910

[. . . ] In the Energy Saving Mode the printer will not use its fusing lamp and Energy Save Mode will be displayed on the LCD. If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 120 minutes. For details, see Setting sleep mode, page 4. 10. Super G3 is an extension of Group 3 fax technology standards, allowing the use of high-speed ITU-T V. 34 bis modems for 33. 6 Kbps transmission and high-speed protocols for rapid handshaking. [. . . ] The LCD shows: 03:F-Code Document Enter I. D. Code:* * ** Use the numeric keypad to enter your F-Code box s four-digit I. D. Here we ve entered 2345: Overwrite Doc. :Off / /Enter If you choose: On: Your bulletin box erases the currently stored document when a new document is stored in it Off: Your bulletin box keeps both the currently stored document and the new document, up to 30 documents in each box. 03:F-Code Document Enter I. D. Code:2345 5 8 9 Press or until the mode you want appears. Press ENTER. code, your fax machine rejects the attempt and aborts this operation. code, the display shows: Press ENTER to save the setting. Your machine starts scanning the document into the selected bulletin box: 03:F-Code Document Fl N. File: 1 A4 Mem 99% Important: The file number (shown above as 1) tells you how many documents are in this bulletin box. You need to know the file s number to erase or print it. 6 Use the numeric keypad to enter the file number (1-30) of the document you want to print. Here we ve entered 3. 03:F-Code Document Fl N. ie o :_ 3 Note: If you want to erase all documents stored in the bulletin box, enter 0 (zero). Select F-Code Box 03:Muratec America 3. 32 Advanced features 3 Press ENTER. The LCD shows: Erasing an empty F-Code box An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all documents in that box before erasing it. ) To erase an empty F-Code box: 03:F-Code Document Enter I. D. Code:* * ** Note: If the F-Code security box is not storing any documents, the machine briefly displays the following before returning to step 2: 03:Select F-Code Box No Document Stored 1 2 Press Program key, C, 4, 0, 2, ENTER. The LCD shows: Select F-Code Box 01:No Number Stored or Select F-Code Box 01:Murata Machinery 4 Use the numeric keypad to enter your F-Code box s four-digit I. D. Here we ve entered 2345: Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-Code box you want to erase. Here, we ve entered 0, 3 and see: 03:F-Code Document Enter I. D. Code:2345 Select F-Code Box 03:Muratec America 5 Press ENTER. code, your fax machine prints all documents in the F-Code security box and then erases them. code, your fax machine aborts the operation and returns to standby mode. 3 4 If you want to erase a different F-Code box than the one that appears on the LCD, enter the box number now. [. . . ] For the name of your authorized service center, contact Muratec (from the United States, call 1-972-364-3350; from Canada, check your in-box materials for the number to call). During the warranty period, the Customer must notify Muratec by telephone of any defective product material and/or workmanship. Transportation (including prepayment of freight and insurance charges) of the product to and from an authorized service center, designated by Muratec, is the responsibility of the Customer. If Muratec provides maintenance or responds to a call which is outside the scope of this warranty, such maintenance shall be billed to the Customer at Muratec s then-current rates for maintenance and parts and shall be due and payable in full upon receipt of invoice. Exclusions 1. [. . . ]