Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MURRAY 405028X51. We hope that this MURRAY 405028X51 user guide will be useful to you.
Lastmanuals help download the user guide MURRAY 405028X51.
Detailed instructions for use are in the User's Guide.
[. . . ] IMPORTANT: The following pictorials are located on your unit or on literature supplied with the product. Before you operate the unit, learn and understand the purpose for each pictorial. If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. [. . . ] Push the clutch/brake pedal completely forward. Move the shift lever to one of the speed settings. NOTE: When you mow in heavy grass or mow with a bagger, put the shift lever in the slowest speed. If you need to go faster or slower, stop the unit and move the shift lever to another speed setting. Make sure the level of cut is still correct. After you mow a short distance, look at the area that was cut. If the mower housing does not cut level, see the instructions to "Level the Mower Housing" in the Maintenance section. Be very careful when you change directions on a hill. When on a slope or in a turn on a hill, move the throttle control to the SLOW position to help prevent an accident. Check the Oil NOTE: The engine was shipped from the factory filled with oil. See the engine manufacturer's instructions for the type of petrol and oil to use. NOTE: Do not check the level of the oil while the engine runs. Follow the procedure in the engine manufacturer's instructions. If necessary, add oil until the oil reaches the FULL mark on the dipstick. The quantity of oil needed from ADD to FULL is shown on the dipstick. Do not smoke when adding petrol to the fuel tank. Do not add petrol when you are inside an enclosure. Before you add petrol, stop the engine and let the engine cool for several minutes. Fill the fuel tank (1) to the FULL (2) position with regular unleaded petrol (see Figure 6). Push the clutch/brake pedal completely forward. Move the throttle control completely forward to the CHOKE or FAST position. Turn the ignition key to the START position. [. . . ] Turn the ignition key to the ON position. Follow the steps, "To Start the Engine" in this book. The engine does not run smooth or has a loss of power. The engine does not run smooth at fast speed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MURRAY 405028X51
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MURRAY 405028X51 will begin.
