User manual MUSE M-1010 MRW

[. . . ] Do not attempt to modify the unit, modifying the unit may cause an accident. Installation or servicing of the unit by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Stop the vehicle before carrying out any operation that could interfere with your driving. Keep the volume at a level which you could hear sounds from outside the vehicle. [. . . ] - Automatic Tuning Press or once, the radio automatically searches a station upward or downward respectively and plays when it finds a station. Scanning/memorizing stations automatically - By SCH/AMS button In tuner mode, press and hold SCH/AMS button for 3 seconds to start scanning for stations and store them automatically in memory. Press SCH/AMS button, the radio plays each preset station for a few seconds. Press SCH/AMS again or numeric buttons 1-6 to listen to corresponding station. Press and hold one of the 1- 6 Number buttons for 2 seconds until LCD shows the corresponding number, which indicates that station is stored in the corresponding number button. Under radio mode, press 1- 6 Number buttons to listen to stored stations. When you are listening to a station stored on a number button, press and hold another number button for more than 2 seconds to store the station on this number button. Note: The unit can be stored up to 6 stations for each band. -- RDS (Radio Data System) Operations -This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received and can automatically switch to the broadcast station with the best reception as you travel on long distances (AF switching). A traffic announcement broadcast from a RDS station, no matter what mode you are. Additionally, if EON information is received, enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information. This function is not available in some areas. Alternative frequency (AF) The AF function switches to a different frequency on the same network in order to maintain optimum reception. In FM mode, press AF button, certain program will be automatically searched and received. If the reception of the current broadcast station deteriorates, “AF” appears in the display and the radio searches for the same program on another frequency. Press AF button again to cancel this function. When reception is bad, the “AF” icon will blink. Press and hold AF button for 3 seconds, the unit will be under “REG ON” or “REG OFF” mode: REG ON: Should be selected to list the local broadcast of the current station, even if there is a national broadcast of this station. REG OFF: Should be selected to listen to the national broadcast of the current station. Traffic alarm (TA) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible. Press TA button, when LCD shows “TA”, traffic program will be automatically searched and saved, when LCD shows “TP”, this means that the RDS broadcast station being received has traffic announcement programmes. [. . . ] The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit. The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. CAUTION: Invisible laser radiation when open and interlocks defeated. WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ]