Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MUSICAL FIDELITY X-A50. We hope that this MUSICAL FIDELITY X-A50 user guide will be useful to you.
Lastmanuals help download the user guide MUSICAL FIDELITY X-A50.
Manual abstract: user guide MUSICAL FIDELITY X-A50
Detailed instructions for use are in the User's Guide.
[. . . ] SPECIFICATIONS
Output power THD
Frequency response S/N ratio Power consumption Power requirements Dimensions (mm)
50 Watts RMS into 8 100 Watts RMS into 4 < 0. 04% 20Hz-20kHz unweighted < 0. 01% 20Hz-20kHz 'A' weighted < 0. 008% 20Hz-20kHz @ 1W unweighted + 0. 2dB 20Hz-20kHz greater than 102dB unweighted greater than 114dB 'A' weighted 120W 100/115/230V 50/60Hz AC (factory preset for country) 110 x 110 x 330 approx. (W x H x D) width and height include feet, depth includes terminals
INSTRUCTIONS FOR USE
Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.
Introduction
Thank you for purchasing the X-A50, 50 watt monobloc power amplifier. [. . . ] For the best results we recommend that you use Musical Fidelity X-LINX "no-nonsense" interconnect cables for this connection. Connect your loudspeaker to the loudspeaker terminals situated on the back panel marked "Loudspeaker Output" Once these connections are made, plug in the IEC type mains lead and switch on the unit. Bi-Amping The X-A50 has a "Loop Out" facility to allow for easy biamping of speakers with bi-wireable crossovers. In this kind of setup typically one X-A50 is used to drive the tweeter (high frequencies) and one to drive the woofer (low frequencies) of each loudspeaker enclosure. Thus in this example four X-A50s would be required for a stereo pair. Taking the left channel connections first, the pre-amp's (or other source's) left output is first connected to the first X-A50's line input and then that X-A50's loop output is connected to the second X-A50's line input, both X-A50s will now be driven from the same left channel signal. The first X-A50 can now be used to drive the woofer and the second, the tweeter of the left channel loudspeaker. Repeat this process for the right channel. If you are in any doubt about bi-amping, please contact your dealer who will be able to help and advise you.
Installation Precautions
Your new X-A50 is designed and built to provide trouble-free performance, as with all electronic devices it is however necessary to observe a few precautions. Please ensure that you have complied with these before you connect the power to your X-A50. [. . . ] Do not remove any covers, the X-A50 will not be covered under warranty if it has been tampered with. Please refer all service work to an authorised Musical Fidelity agent. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MUSICAL FIDELITY X-A50
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MUSICAL FIDELITY X-A50 will begin.
