User manual MUSTEK BEARPAW-1200-QUICK-START

[. . . ] Information in this document is subject to change without notice. Companies, names, and data used in examples are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Mustek Systems, Inc. Mustek may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. [. . . ] Upon attaining 100%, your system will automatically load Photo ExpressTM. To enhance your overall BearPaw experience this function was designed to work with Photo ExpressTM 3. 0 only. Copy To perform a copy, do the following: 1. Place the document with the image you want to copy face down on your scanner window glass. Screen display will show copying progress. Upon attaining 100%, your system will automatically send your image to your printer for printing. Make sure that your printer is connected properly and turned on. This function can only printout one copy at a time. To make multiple copies, use the COPY button located on the BearPaw Panel. 8 Fax To perform a fax, do the following: 1. Place the document with the image you want to fax face down on your scanner window glass. After scanning, fax console will appear on screen. Phone Book icon Dial button 3. Click on the number you want to dial or click on the phone book icon to open your telephone directory to select the number to dial. If in case line is busy system will redial and LED panel will show the current status. To enhance your overall BearPaw experience, this function was designed to work only with the Mustek® fax utility software provided when you installed the software drivers. Make sure you have a valid fax modem connection. In case your fax modem is connected to a PBX (Private Branch Exchange) system, first dial the number to get an outside line before dialing the telephone number (e. g. , 0 then 1234567). 9 Email To perform an email, do the following: 1. Place the document with the image you want to email as an attachment face down on your scanner window glass. Screen display will show emailing progress. Upon attaining 100%, your system will automatically load your default email program and place your scanned image as a JPEG file format attachment. To maximize your overall BearPaw experience, this function was designed to work only with at least Microsoft® Internet Explorer 4. 0 OR Netscape® Communicator 4. 5 OR Lotus cc:Mail 8. 2. Make sure to setup properly your email program. Refer to the documentation that came with your email program or consult your system administrator if any problem exists. BearPaw Panel To use the BearPaw Panel, press the PANEL button and BearPaw Panel will appear on screen. If you should press any scanner button when BearPaw Panel is open, then BearPaw Panel will be hidden from view and scanner button function operates as usual. 10 BearPaw Panel Settings Clicking on the Settings button located on the BearPaw Panel will show the following screen allowing you to make changes to your BearPaw Panel settings. BearPaw Panel (non-changeable) Default Settings 11 Scan To perform a scan, do the following: 1. [. . . ] Click on Recover and another drop down menu will appear. Click on the item you want recovered to the Windows® default. The Status and Progress Bar area will show its progress. Upon completion, your system will automatically recover the system item you selected. [. . . ]