User manual MYRYAD MDV300 2

[. . . ] The available options are English, French and Spanish. Press SETUP button Highlight "Language" icon Language sub menu appears. Language Video Audio 1 Audio 2 Rating TV screen The aspect ratio of the picture provided by the DVD player can be varied in line with the features available on the TV in use. 4x3 Letter Box Allows you to see movies in their original aspect ratio. The entire frame of the movie will be displayed but it will occupy a smaller portion of the screen. press ENTER OSD Menu Subtitle Audio Disc Menu English Off English English Highlight the desired item and press ENTER to change the setting. [. . . ] The player will require a password to play any disc with a rating level higher than the setting. Press SETUP button Highlight "Rating" icon Rating sub menu appears. Language Video Audio 1 Audio 2 Rating Test Mode press ENTER Highlight the desired item and press ENTER to change the setting. Press SETUP button to save the setting and quit. Default setting Pro Logic Cent Delay Surr Delay Spkr Setup : Off : 0 ms : 0 ms : Down Mix (5. 1 not activated) Password Rating ---8. Adult Highlight "Password", input the 4 digit password, and press ENTER button to release the rating lock. Pro Logic The player is equipped with a Dolby Pro Logic decoder. You may turn this on or off. Default setting Password Rating : 7890 : 8. Adult Cent Delay / Surr Delay For 5. 1 decoded output (see Spkr Setup below), you may add signal delay to the Center and Surround speaker outputs, to compensate if the Center or Surround speakers are closer to the listener than the Left and Right front speakers. The delay can be set between 0ms and 5ms which will compensate for differences in speaker distance for 0 to 5 feet (0 to 1. 52m) Spkr Setup The player defaults to L R down mixed stereo audio output. This is the normal setting for connecting the player to a TV. Language Video Audio 1 Audio 2 Rating Highlight "Rating", then press ENTER button repeatedly to change the setting: 1. Adult Highlight "Password", re-enter the password and press ENTER button to lock. Press SETUP button to save the setting and quit. To reset the password, first input the current password (e. g. The TV screen will display "unlock". Then input the desired new password and press ENTER again. Subwooder Surround Center C S Spkr Size Return Off Off Off Large Highlight "Spkr Setup" icon, press ENTER button, sub menu appears. Highlight "5. 1 Channel" icon, press ENTER button. Highlight the connected speaker's name press ENTER button to switch the speaker ON or OFF. Highlight "C S Spkr Size" and press ENTER button to select Large or Small speakers. If "Large" is selected the speakers will receive the full frequency range. If "Small" is selected the bass frequencies will be redirected to the subwoofer. After setting all speakers, press SETUP button to quit. 24 SMART MY-LINK OPERATION Introduction When used as a linked system with a Myryad Preamplifier or Integrated Amplifier equipped with "Smart My-Link" the MDV 300 has a number of extra features that make the system as a whole easier and quicker to use than a normal hifi. These include: Mute/Pause Control (Amplifier/DVD) When the DVD input on the amplifier is selected, pressing MUTE on the amplifier's remote control will mute the amplifier and pause the DVD. When the amplifier mute is cancelled, DVD playback will resume. Start-on-Play (DVD) Press play on the DVD player (or the remote control) and both the DVD player and the amplifier will switch out of standby (if necessary) and play the DVD. The amplifier will automatically select the DVD source. Power-Saving Mode (Amplifier) The amplifier will switch the DVD Player into standby if the DVD input remains unselected for more than ten minutes. Automatic Switch-On (DVD) If the standby button on the DVD player is pressed, the amplifier will also awaken and select the DVD input. Start-on-Open (DVD) Press open/close on the DVD player (or the remote control) and both the DVD player and the amplifier will switch out of standby (if necessary) and the DVD drawer will open. The amplifier will automatically select the DVD source. Intelligent Input Select (Amplifier) Press a source button (e. g. [. . . ] Press AUDIO button to select an alternative audio track. Check that the MUTE function of the TV or Amplifier is not active There will be no sound output during REVERSE PLAY / PAUSE / STEP / SLOW and SCAN. Select an alternative audio track by pressing the remote control "AUDIO" button, or by using setup in the disc menu. Connect the digital audio output to a digital amplifier (or pre-amplifier such as, for example, a Myryad MDP 500 G6 Pre-amplifier Processor). No surround sound If digital output has been activated: Press SETUP button Highlight "AUDIO" Highlight "DIGITAL OUTPUT" Select BITSTREAM or LPCM Press SETUP button Check that the amplifier or active type loudspeakers are switched on. . MP3 disc no sound or noisy When PC program files or other data files are mixed with MP3 files on the same disc, the player may play the non-MP3 files with noise or no sound. [. . . ]