User manual NAD 5120

[. . . ] If the unit is not going to be used for some time, disconnect the plug from the AC socket. Should water get into your NAD 5120, shut off the power to the unit and remove the plug from the AC socket. Have the unit inspected by a qualified service technician before attempting to use it again. Do not remove the cover, there are no user-serviceable parts inside. [. . . ] Always use the OPEN button to open or close the disc drawer. With a CD loaded and the tray closed, the CD Player will scan the disc and Display Panel will show The number of tracks and the total playing time of the disc. If the CD Tray is empty, then the Display Panel will display the words `no disc'. Pressing OPEN when a CD is playing will stop the playback and open the CD Tray. Caution: The NAD 5120 is not designed for use with `damping discs' placed on the CD, or two CDs stacked together in the CD Tray. Do not close the CD Tray by hand with the power off. The Display Panel shows information about the NAD 5120's operating modes and information about the CD currently loaded. There is no disc in the CD Tray The unit is in Play mode [Flashing] The unit is in Pause mode RANDOM PLAY. Displays the current track number being played or the track number that will be played when PLAY is pressed. When the disc is first loaded, Track Number shows the total number of tracks available on the disc. Is used in conjunction with the TIME button. The TIME button switches the Time Display through three different modes, showing either: The time played of the current track, in minutes and seconds. The playing time remaining for the current track, in minutes and seconds. The 5120 will normally display the current track number and position in the track in minutes, and seconds (the default display). Pressing the TIME button will cycle through the alternative display options and back to the default display. Pressing REPEAT once puts the player into Track Repeat mode. This will continuously repeat the current track as shown in the Display Panel. Pressing REPEAT a second time puts the player into Disc Repeat mode. This will continuously play the whole disc, returning to Track 1 each time the last track has been finished. in Disc Repeat , `REPEAT' flashes in the Display Panel. Pressing REPEAT a third time cancels the Repeat function and returns the NAD 5120 to normal play from the current track. pressing STOP also cancels the Repeat mode. [. . . ] Wipe from the centre of the disc outwards rather than radially. If the CD playing surface becomes dirty, lightly dampened the cloth with soapy water to remove any dirt and then wipe with a cloth lightly damped with water only. Do not use LP record cleaning solutions on your CDs. The SCAN buttons fast forward or fast reverse through the tracks on the disc, giving an audible indication of the contents of the tracks. [. . . ]