User manual NAD C315BEE

[. . . ] 1 2 3 4 5 6 7 read instructions - All the safety and operating instructions should be read before the product is operated. Retain instructions - The safety and operating instructions should be retained for future reference. heed warnings - All warnings on the product and in the operating instructions should be adhered to. Follow instructions - All operating and use instructions should be followed. [. . . ] Do not place the unit on a soft surface like a carpet. Do not place it in an enclosed position such a bookcase or cabinet that may impede the air-flow through the ventilation slots. Make sure the unit is switched off before making any connections. The RCA sockets on your NAD C315BEE are colour coded for convenience. Ensure that leads and sockets are not damaged in any way and all sockets are firmly pushed home. If the unit is not going to be used for some time, disconnect the plug from the AC socket. Should water get into your NAD C315BEE, shut off the power to the unit and remove the plug from the AC socket. Have the unit inspected by a qualified service technician before attempting to use it again. Do not remove the cover, there are no uSer-Serviceable partS inSide. If necessary, lightly dampen the cloth with soapy water. Do not use solutions containing benzol or other volatile agents. 3 headphone socket :A 1/4" stereo jack socket is supplied for headphone listening and will work with conventional headphones of any impedance. Inserting a headphone jack into this socket automatically switches off the loudspeakers. the volume , tone and balance controls are operative for headphone listening. Use a suitable adaptor to connect headphones with other types of sockets, such as 3. Green LEDs just above each button will indicate which input is currently selected. TAPE Selects the output from a tape recorder when playing back tape recordings being made through the Tape sockets. 5mm stereo plug is inserted into the MP socket, the indicator above the socket will illuminate, and the DISC line-level source will be disconnected. It is recommended to mute the volume or switch to a different input before plugging/ unplugging the external Media Player cable 5 infra-red remote control command receiver :The infrared sensor, located behind this circular window, receives commands from the remote control. There must be a clear line-of-sight path from the remote control to this window; if that path is obstructed, the remote control may not work. 6 tone controls :The NAD C315BEE is fitted with BASS and TREBLE tone controls to adjust the tonal balance of your system. The 12 o'clock position is `flat' with no boost or cut, and an indent indicates this position. [. . . ] After amplifier has cooled down, turn back on. IR receiver in direct sun or very bright ambient light Treble Bass Continuous output power into 8 2 Rated distortion (THD 20Hz - 20kHz) Clipping power (maximum continuous power per channel 4 and 8) IHF Dynamic headroom IHF dynamic power (maximum short term power per channel) ±5dB at 10kHz ±8dB at 100Hz 40W (16dBW) 0. Dimensions (W x H x D) 6 Net weight Shipping weight Net Gross 435 x 70 x 242mm 435 x 80 x 292mm 5. Specifications are subject to change without notice. [. . . ]