User manual NAD C375BEE

[. . . ] ® Owner's Manual Stereo Integrated Amplifier C 375BEE SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. follow all warningS and inStructionS marked on the audio equipment. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] Use a twin RCA-to-RCA lead to connect the Media Player's left and right "Audio Outputs" to this input. NOTE IfanexternalMediaPlayerisconnectedtothefrontMPsocket(usinga 3. 5mmstereoplug)whilelisteningtoaMPline-levelsource, theexternal MediaPlayerwillbedirectlyselectedwiththeMPline-levelsource immediatelydisconnected. 2 cd input: Input for a CD or other line-level signal source. Use a twin RCA-to-RCA lead to connect the CD player's left and right "Audio Outputs" to this input. 3 tuner input: Input for a tuner or other line-level signal source. Use a twin RCA-to-RCA lead to connect the tuner left and right "Audio Outputs" to this input. 4 diSc input: Input for additional line level input signals such as CD, Mini Disc player or the output signal from a step-up amplifier for a turntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. NOTE WiththeoptionalPP375PHONOMODULEinstalled, theDISCinput socketisdisabledandthePHONOsourceselectedastheactiveinput. 5 aux input: Input for additional line level input signals such as another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. 6 tape 2 in/out: Connections for analog recording and playback to an audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right "Audio Output" of the tape machine to the TAPE 2 IN sockets for playback. Connect the left and right "Audio Input" of the tape machine to the TAPE 2 OUT sockets for recording. 7 tape monitor in/out: Connections for analog recording and playback to a secondary audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right "Audio Output" of the tape machine to the TAPE MONITOR IN sockets for playback and tape monitoring. Connect the left and right "Audio Input" of the tape machine to the TAPE MONITOR OUT sockets for recording. to make a recording When any source is selected, its signal is also fed directly to any tape machine connected to the TAPE 2 OUT or TAPE MONITOR OUT for recording. tape to tape copYing You can copy between two tape machines connected to your NAD C 375BEE. Put the source tape in the recorder connected to Tape 2 and the blank tape into the recorder connected to Tape Monitor. By selecting TAPE 2 input you can now record from Tape 2 to Tape Monitor and monitor the signal coming from the original tape. NOTE TherewillbenoTape2outputwhenTape2(orTapeMonitorOUTwhen TapeMonitor)istheselectedsourceinput. Thispreventsfeedback throughtherecordingcomponenttherebypreventingpossibledamage toyourspeakers. 16 Optional phono module PP 375 17 18 19 20 21 22 23 IDENTIFICATION OF CONTROLS rear panel 8 pre out 1: The PRE OUT 1 sockets can be used to drive an additional power amplifier. [. . . ] · Check connections and speakers. · Check connections to all speakers in the system. · Remove obstruction. · Place unit away from direct sun, reduce amount of ambient light. · Turn C 375BEE OFF; make sure ventilation slots on top and bottom of C 375BEE are not blocked. [. . . ]