User manual NAD C541

[. . . ] Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Do not place this unit on an unstable cart, stand or tripod, bracket or table. [. . . ] The number for the current track being played blinks. the display shows up to 16 numbered tracks. OVER If the loaded disc contains over 16 tracks, "OVER" will light up in the bottom centre area of the display. mEMORY During programming for Program Play , MEMORY will light up. PROGRAM Together with MEMORY, PROGRAM will light up during playback of a selection of pre-programmed tracks of the disc. STATUS A right-pointing arrowhead , located near the left edge of the time display, lights up during PLAY. Two vertical bars indicate that the player is in PAUSE. In STOP mode the display reverts to showing the total number of tracks and playing time of the disc. No dISC When no disc is present or when you load a disc that cannot be read (because it is dirty or is upside-down) "no dISC" lights up in the display. REMOTE RECEIVER An infrared sensor, located at the righthand portion of the display window, receives commands from the remote control. There must be a clear line-of-sight path from the remote control to this window; if that path is obstructed, the remote control may not work. HDCD® indicator This indicator will light up when an HDCD® encoded disc is played. OPEN Press this button to open the disc drawer, and press it again to close the drawer. If this button is pressed while a disc is being played, playback will stop, the pickup will reset to the beginning of the disc and the drawer will open. Opening the drawer will also delete the players memory for Program Play. The Repeat Play mode can be used in combination with Program and Random Play modes. when the C541 is in Repeat Play mode "REPEAT 1" or "ALL" will be shown in the Display Panel. Repeat Play mode can also be disengaged by pressing the STOP button twice. On the first press of the STOP button, playback will stop, the second press will disengage Repeat Play mode. RANDOM Engaging the Random Play mode will play all the tracks once on the CD in a random order. From Stop, press first the RANDOM and then the PLAY/PAUSE button to engage Random Play mode. During normal playback the Random Play mode can also be engaged by pressing the RANDOM button. [. . . ] nevertheless , the discs should not be abused or handled carelessly. For best results, grasp the disc only by its edges. CLEANING DISCS Soiled discs may be cleaned by wiping with a soft cloth, either dry or moistened, with water. Do NOT use conventional LP recordcleaning products (cleaning solutions, sprays, treated cloths, or anti-static preparations), nor any kind of chemical solvent (alcohol, benzene, et al). [. . . ]