User manual NAD C542

[. . . ] Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line Output jacks to the corresponding CD inputs on your amplifier. Press the green POWER button to turn on the player. At any time you may press SKIP or to select different tracks on the disc. Press PLAY/PAUSE if you want to stop play temporarily while keeping the pickup at its current position on the disc. [. . . ] The display reverts to showing the number of tracks and total playing time on the disc. If the CD player was programmed to play a selection of tracks, the program will be retained in the player's memory. pressing STOP a second time will also delete the program. Pressing STOP twice will also disengage Repeat and Random play if these were engaged. Press the Repeat button once to select the REPEAT 1 mode, in which only the current track is repeated over and over again. Pressing the Repeat button once again selects the REPEAT ALL mode, in which the entire disc is played from beginning to end, over and over again. Press the Repeat button a third time to cancel the repeat cycle and return to normal operation. The Repeat Play mode can be used in combination with Program and Random Play modes. when the C 542 is in Repeat Play mode "REPEAT 1" or "ALL" will be shown in the Display Panel. Repeat Play mode can also be disengaged by pressing the STOP button twice. On the first press of the STOP button, playback will stop, the second press will disengage Repeat Play mode. RANDOM Engaging the Random Play mode will play all the tracks once on the CD in a random order. From Stop, press first the RANDOM and then the PLAY/PAUSE button to engage Random Play mode. During normal playback the Random Play mode can also be engaged by pressing the RANDOM button. The current track will stop playing and the first randomly selected track will commence. The Random Play mode can be used in combination with the Repeat Play All mode but not with Program Play mode. when the C 542 is in Random mode "RANDOM" will be shown in the Display Panel. Press the RANDOM button again to cancel Random Play mode and return to normal Play mode. random Play mode can also be disengaged by pressing the STOP button twice. On the first press of the STOP button, playback will stop, the second press will disengage Random Play mode. This button works only while the player is in PLAY or PAUSE. After a STOP command, or after loading a new disc, you must press PLAY before the scan circuit will work. [. . . ] For best results, grasp the disc only by its edges. CLEANING DISCS Soiled discs may be cleaned by wiping with a soft cloth, either dry or moistened, with water. Do NOT use conventional LP recordcleaning products (cleaning solutions, sprays, treated cloths, or anti-static preparations), nor any kind of chemical solvent A severely soiled disc may be washed in a warm-water spray, possibly with a small amount of a mild kitchen detergent added, and then wiped dry with a clean, soft towel. When cleaning the disc, use only RADIAL strokes (from centre to edge). [. . . ]