User manual NAD C660EN

[. . . ] EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. PRECAUTIONS Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. [. . . ] If there is an interruption longer than 4 seconds, this unit stops recording and updates the PMA data. WHEN RECORDING ADDITIONAL TRACKS Additional recordings are made in sequence to the end of the last track on a non-finalized CD-R/RW if there is enough time remaining on the disc. Up to 99 tracks can be recorded on a single disc. mINIMUM LENGTH OF RECORDING YOU CAN MAKE The shortest possible length of recording is restricted to 6 seconds. In other words, you cannot terminate recording before the first 6 seconds are up. during this interval , pressing PLAY or STOP has no effect. COMPRESSED AUDIO, AND VIDEO OR GRAPHICS DATA This unit is not capable of recording compressed audio like DTS and Dolby Digital Surround sounds. Nonaudio data contained in a Graphics CD or HDCD cannot be recorded on this unit either. COPY PROHIBIT Some commercial CD discs may contain a copy protection data bit that will prevent the disc from being dubbed. in this case , "COPY PROHIBIT" will light. SRC (SAMPLE-RATE CONVERTER) INDICATOR This indicator lights when the Sample-Rate Converter is in use to change the digital sample rate when the incoming signal is not the standard 44. This is an automatic function and does not require any user intervention. DISC DUBBING 1 Load a blank or non-finalized CD-R/RW disc on the record tray After TOC and OPC process, total number of tracks and total time of all tracks will be displayed. "CD-R" or "CD-RW" will also light depending on the disc in the tray. 2 Press SPEED repeatedly to select dubbing speed With each press of the button, the dubbing speed changes as shown on the left. The recording takes as long as the actual running time of the disc. ⷠWhen no speed indicator lights, the unit is set to real-time recording. ⷠNote that the slower the record-dubbing speed, the more tolerant the unit is of errors on the blank disc. However, with most high-quality blank discs, the 2x and 4x speeds should not present a problem. 3 Load the disc to be dubbed on the play tray After TOC process, total number of tracks and total time of all tracks will be displayed and CD will light. 4 Press DUB on the remote control or DUBBING on the front panel, and wait until "01 00:00" is displayed When "DISC FULL" is displayed, there is not enough space on the disc. 4x speed "CD" lights 5 Press PLAY on the play deck or record deck Alternatively, press PLAY on the remote control. [. . . ] It is important to note that the HDCD process is completely compatible with standard recordings. Its highquality digital-to-analog circuitry provides enhanced play-back from all standard CD audio discs. cD-TEXT DISC PLAYBACK · CD-Text will only be operated through Remote Control. ⷠPress TEXT button of the appointed deck in stop mode, then the title of inputted Text CD will be scrolled once in 13 digits. [. . . ]