User manual NAD C717

[. . . ] ® Owner's Manual DVD Receiver C 717 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. follow all warningS and inStructionS marked on the audio equipment. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] The C 717 will switch itself to standby mode. The C 717 is now restored to its factory default settings. Please note that setting the C 717 to factory default will delete all AM and FM presets. The timer settings will also be restarted. 1 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH OPERATION uSing the c 717'S internal dvd plaYer ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA You may operate the C 717 DVD Receiver from its front panel or via the SR 9 remote control. Since the remote will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, "IDENTIFICATION OF CONTROLS - FRONT PANEL". SETUP MENU REGION MANAGEMENT INFORMATION The C 717's internal DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number shown on the back of the C 717, the C 717 cannot play that disc. The OSD will display "Region Error" ("REGION Err" in the display window) when an incompatible region disc is loaded. PLAYABLE DISCS The C 717 has exceptional playability. It has support for DVD video, DVD±R, DVD±RW, VCD/SVCD with playback control (PBC), Audio CD and CD-R/CDRW that contains audio titles, DivX, MP3, WMA and JPEG files. NOTE Youcannotplaybackdiscsotherthanthoselistedabove. Todosomay rendertheC717permanentlyinoperable. The Setup Menu allows one to customize the operation of the C 717. If the factory defaults do not suit your taste, you will need to use the setup menu to configure the C 717 yourself. To access and navigate through the Setup Menu selections, please refer to and follow the directions stated in the above section about "NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES. " The Setup Menu is only available at DVD mode. DISC LOADING AND PLAYBACK There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the C 717 to malfunction. "NO DISC" appears on both the C 717's display and the TV/monitor screen, if the disc is placed upside down (and it is a single sided disc). The following are important tips when loading a disc · Do not push the disc tray while it is moving. Doing so may cause the C 717 to malfunction. · Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the C 717 to malfunction. · Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children's fingers around the closing disc tray, as there is a risk of personal injury. Press [ ], the disc tray is automatically closed. [. . . ] · IR transmitter window on remote or IR receiver window on C 717 is obstructed. · C 717 front panel is in very bright sunlight or ambient light. ITALIANO DEUTSCH NEDERLANDS SVENSKA noteS on diScS handling diScS Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. cleaning diScS Fingerprints and dust on the disc can cause poor picture quality and sound distortion. [. . . ]