User manual NAD NAD-S100

[. . . ] Retain this notice and the owner's manual for future reference. All warnings on the unit and in its operating instructions should be adhered to. Do not use this unit near water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool. The unit should be installed so that its location or position does not interfere with its proper ventilation. [. . . ] Do not place it in an enclosed position such as a bookcase or cabinet that may impede the airflow through the ventilation slots. Switch the unit and all ancillary equipment off before making any connections. The RCA connectors on your S100 are colour coded for convenience. Red and white are Right and Left audio respectively, and yellow for NAD-Link. the S100 comes with RCA leads for basic connections. Where additional leads are required, use high quality leads and connectors for optimum performance and reliability. Ensure that leads and connectors are not damaged in any way and all connectors are firmly pushed home. If the unit is not going to be used for some time, disconnect the plug from the AC socket. Should water get into your S100, shut off the power to the unit and remove the plug from the AC socket. Have the unit inspected by a qualified service technician before attempting to use it again. Do not remove the cover, there are no user-serviceable parts inside. If necessary, lightly dampen the cloth with soapy water. Do not use solutions containing benzol or other volatile agents. Apart from the twin RCA lead, most turntables also include a single wire earth lead. The S100 comes supplied with a separate AC Mains cable. Before connecting the cable to a live wall socket ensure that it is firmly connected to the NAD S100's AC Mains input socket first. Always disconnect the AC Mains cable plug from the live wall socket first, before disconnecting the cable from the S100 Mains input socket. voltage conversion: A notice printed on the rear indicates the AC power-line voltage that the preamplifier requires. However, every model S100 amplifier has a "universal" power supply that can be modified easily for operation in other countries. If you wish to transport your S100 to a nation that employs a different power-line voltage, an authorised NAD dealer or service agency can convert it for such use. Use a twin RCA-to-RCA lead to connect the CD player left and right `Audio Outputs' to these inputs. The S100 only accepts analogue signals from your CD player. [. . . ] Pressing the POWER button turns the unit On and after a few seconds, the Power indicator LED will extinguish. Pressing the POWER button again will turn the preamplifier Off. When the S100 is switched On, pressing the Standby button on the remote handset will put the S100 into Standby mode and the Power indicator will light up blue. The blue Standby indicator shows that power is being supplied to the S100, but the system is currently in the Standby mode. [. . . ]